Bedienungsanleitung Ferm BGM1020 (Seite 3 von 44) (Deutsch, Englisch, Holländisch, Französisch, Spanisch, Polnisch)

510118

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

BENCH GRINDER

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

The numbers in the following text refer to the

pictures on page 2

Read the operating instructions carefully

before using this device. Familiarise

yourself with its functions and basic

operation. Service the device as per the

instructions to ensure that it always func-

tions properly. The operating instructions

and the accompanying documentation

must be kept in the vicinity of the device.

Contents

1. Machine data

2. Safety instructions

3. Installation

4. Operation

5. Maintenance

1. Machine data

Technical specifications

Voltage 230 V

Frequency 50 Hz

Power input 250 W

Rotational speed, not loaded 2950/min

Duty time S

= 30 min

Grinding wheel dimensions

Ø 150x20 mm

Ø 150x40 mm

Spindle hole diameter

Ø 12.7 mm

Weight 8.5 kg

Lpa (Sound pressure level) 62.6+3 dB(A)

Lwa (acoustic power) 75.6+3 db(A)

Load factor

A load factor of S

= 30 min (intermittent

periodic duty) means that you may operate the

motor continuously at its nominal power level

for no longer than the time stipulated on the

specifications label (30 minutes ON period). If

you fail to observe this time limit the motor will

overheat. During the OFF period the motor will

cool again to its starting temperature.

Vibration level

The vibration emission level stated in this instruction

manual has been measured in accordance with

a standardised test given in EN 61029; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration

when using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

significantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping your

hands warm, and organizing your work patterns

Contents of the package

1 Bench grinder

2 Sets eye shield bracket + eye shield

1 Tool rest (right)

1 Tool rest (left)

1 Instruction manual

1 Safety instructions

1 Guarantee card

Check the machine, loose parts and accessories

for transport damage.

Features

Fig. A

1. On/off switch

2. Tool rest (right)

3. Eye shield

4. Eye shield bracket

5. Screw

6. Tool rest (left)

2. safety instructions

Explanation of symbols

Denotes risk of personal injury, loss of

life or damage to the tool in case of non-

observance of the instructions in this

manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm BGM1020 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info