Bedienungsanleitung Ferm BGM1021 (Seite 6 von 36) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

510119

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

6 Ferm

between the tool rest and the grinding wheel. This

can cause the stone to shatter, the motor to seize,

or the workpiece to fly off, all of which can cause

injury and damage. Whenever the machine has

been in use for 30 minutes, it should be switched

off. Allow the machine to cool down to room

temperature.

Operation

• Check that the switch is in the “OFF/0” position

before connecting the machine to the power

supply.

• Press the power switch into the “ ON/1”

position to start your bench grinder.

• Always keep the power cord out of the way of

the tool’s moving parts.

5. Maintenance

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

These machines have been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Trouble shooting

Should the machine fail to function correctly, a

number of possible causes and the appropriate

solutions are given below:

  

• The motor has become overloaded.

•Give the motor a chance to cool down.

• The motor is defective.

•Contact the service point.

  

• There is a break in the power supply to the

machine.

•Check whether there is a break in the

power cord.

• The switch may be damaged.

•Contact the service point.

Repairs and servicing should only be

carried out by a qualified technician or

service firm.

Cleaning

Keep the ventilation slots of the machine clean to

prevent overheating of the engine. Regularly clean

the machine housing with a soft cloth, preferably

after each use. Keep the ventilation slots free from

dust and dirt. If the dirt does not come off use a

soft cloth moistened with soapy water. Never use

solvents such as petrol, alcohol, ammonia water,

etc. These solvents may damage the plastic parts.

Faults

Should a fault occur, e.g. after wear of a part,

please contact the service address on the

warranty card. In the back of this manual you find

an exploded view showing the parts that can be

ordered.

Environment

To prevent damage during transport, the appliance

is delivered in a solid packaging which consists

largely of reusable material. Therefore please

make use of options for recycling the packaging.

Faulty and/or discarded electrical or

electronic apparatus have to be

collected at the appropriate recycling

locations.

Warranty

The guarantee conditions can be found on the

separately enclosed guarantee card.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm BGM1021 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info