Ferm 91
• Aflad ikke batteriet til minimum. Så snart du bemærker, at styrken eller den maksimale
omdrejningshastighed begynder at tage af, skal batteriet oplades. Når du fortsætter med at
bruge boret, og batteriet bliver helt afladet, kan den såkaldte ‘ombyttede poler’-effekt
forekomme. Batteripolernes polaritet bliver byttet om: ‘+’ bliver til ‘-‘ og ‘-‘ bliver til ‘+’. Er
dette først sket, vil polariteten stadig være byttet om under opladningen, og dette vil skade
batteriet uopretteligt.
Hvis akku-boremaskinen ikke skal bruges i en længere periode, skal batteriet lades
helt op forinden. Batteriet skal være opladet under opbevaringen.
5. SERVICE & VEDLIGEHOLDELSE
Sørg for at maskinen ikke står under strøm, når der udføres
vedligeholdelsesarbejder på mekanikken.
Disse maskiner er fremstillet til at fungere problemfrit i lang tid og med minimal vedligeholdelse.
Levetiden kan forlænges, hvis maskinen rengøres regelmæssigt og håndteres korrekt.
Rengøring
Rengør maskinhuset regelmæssigt med en blød klud, fortrinsvist efter hver anvendelse. Hold
blæserristen fri for støv og snavs. Fjern fastsiddende snavs med en blød klud fugtet med
søbevand. Brug ikke opløsningsmidler, som f.eks. benzin, alkohol, ammoniak, osv. Disse
midler kan beskadige plastikdelene.
Smøring
Maskinen behøver ingen ekstra smøring.
Fejl
Skulle en fejl opstå, f.eks. pga. slidtage af en enhed, kontakt venligst serviceadressen på
garantibeviset. På bagsiden af denne manual finder du en tegning med alle dele, der kan bestilles.
Miljø
For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er så
vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.
NiCd celler kan genvindes.
Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres på
en genbrugsplads.
Garanti
Læs det separat vedlagte garantikort for garantibetingelserne.
UK
D
NL
F
E
P
I
S
SF
N
DK
Ferm
Important safety notes on charger and batteryblok
If you come into contact with acid from the battery block, rinse it off with water
immediately. If acid gets into your eyes, rinse out your eyes at once with water and
contact a doctor immediately!
1. Read and note the operating instructions and safety notes for the charger and battery block
before use!
2. NB! Only use the charger and battery block that were supplied by the manufacturer -
otherwise you will risk an accident.
3. Protect the charger, battery block and power tool from moisture, e.g. rain or snow.
4. Always check that all cables are connected correctly before using the charger.
5. If you discover that a cable is damaged, you should not use the charger again. Have the
damaged cable replaced immediately.
6. When the charger is not in use, the mains plug should be removed from the power socket.
Do not pull out the plug by grasping the cable.
7. If the charger has been dropped or has otherwise been exposed to high mechanical
stresses, you should have it checked for damage by an authorised dealer before using it
again. Damaged parts should be repaired.
8. Exercise caution when handling the battery block and do not drop it or expose it to impacts.
9. Never attempt to repair the charger or battery block yourself. Repairs must always be
carried out by an authorised dealer - otherwise you risk an accident.
10. Before cleaning or servicing the charger or battery block, always pull the plug from the
charger socket.
11. Never charge the battery block when the ambient temperature is below 5 °C or above 40°C.
12. The air vents in the charger must never be blocked.
13. The battery block must not be short-circuited.
A short-circuit will cause a high current to flow. This may result in overheating, the
danger of fire or explosion of the battery block. This may damage the battery block
or the user may risk an accident.
Therefore:
• Do not connect any cables to the poles of the battery block.
• Take care that there are no metal objects (nails, paper clips, coins, etc.) on the contact
surface of the battery block.
• Do not expose the battery block to water or rain.
• Only use the battery block supplied in combination with this cordless drill/screwdriver
so as to avoid faults and/or risks to persons.
14. Adamaged battery block or one that can no longer be charged must be disposed of as
special waste. Do not discard it with household waste.
15. Never throw the battery block onto a fire or into water. This will risk explosion!
6
GB
D
NL
F
E
P
I
S
SF
N
DK
