Bedienungsanleitung Ferm CDM1086 (Seite 5 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

510091

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Ferm

CORDLESS DRILL

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers. All

products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive Warranty.

We hope you will enjoy using this product for many

years to come.

The numbers in the text refer to the diagrams

on pages 2 - 4.

Read the operating instructions carefully

before using this device. Familiarise

yourself with its functions and basic

operation. Service the device as per the

instructions to ensure that it always

functions properly. The operating

instructions and the accompanying

documentation must be kept in the

vicinity of the device.

Contents

1. Machine information

2. Safety instructions

3. Mounting accessories

4. Operation

5. Service & maintenance

1. MACHINE INFORMATION

Technical specifications

Voltage 18 V

Charger voltage 230-240 V~

Charger frequency 50 Hz

Battery output 1.5 Ah

Charge time 70 minutes

Chuck capacity 1.0 - 10 mm

Drill speeds 2

Max. torque (low speed) 20 Nm

No-load speed

Position I 0 - 350/min

Position II 0 - 1250/min

Weight (incl. battery) 1.5 kg

Lpa (acoustic pressure) 75 dB(A), K=3

Lwa (acoustic power) 86 dB(A), K=3

Vibration 1.68 m/s

, K=1.5

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in EN

60745; it may be used to compare one tool with

another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned

• using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

• the times when the tool is switched off or when

it is running but not actually doing the job, may

signifi cantly reduce the exposure level

Protect yourself against the effects of

vibration by maintaining the tool and its

accessories, keeping your hands warm, and

organizing your work patterns

Contents of packing

1 Cordless drill

1 Battery

1 Charger

2 Double-sides bits

1 Operating instructions

1 Safety instructions

1 Warranty card

Check the appliance, any loose parts and

accessories for damage caused during transport.

Product information

Fig. A

1. Direction switch

2. Battery release button

3. Battery

4. On/Off switch

5. Torque setting ring

6. Chuck

7. Speed selection switch

2. SAFETY INSTRUCTIONS

Explanation of the symbols

Denotes risk of personal injury, loss of

life or damage to the tool in case of non-

observance of the instructions in this

manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CDM1086 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info