Bedienungsanleitung Ferm CDM1134 (Seite 5 von 36) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

763642

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Service

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

For the charger

Intended use

Charge only 16V MAX.1.5Ah Li-ion type

rechargeable battery packs. Other types of batteries

may burst causing personal injury and damage.

a) The appliance is not to be used by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they

have been given supervision or instruction

b) Children being supervised not to play with

the appliance

c) Do not recharging non-rechargeable batteries!

d) During charging, batteries must be placed in

the well ventilated area!

Residual risks

Even when the power tool is used as

prescribed it is not possible to eliminate all

residual risk factors. The following hazards

may arise in connection with the power tool’s

construction and design:

a) Health defects resulting from vibration

emission if the power tool is being used

over longer period of time or not adequately

managed and properly maintained.

b) Injuries and damage to property to due to

broken accessories that are suddenly dashed.

Warning! This power tool produces an

electromagnetic field during operation.

This field may under some circumstances

interfere with active or passive medical

implants. To reduce the risk of serious or

fatal injury, we recommend persons with

medical implants to consult their physician

and the medical implant manufacturer

before operating this power tool.

2. MACHINE INFORMATION

Intended use

This cordless drill is intended for driving in and

loosening screws as well as for drilling in wood,

metal and plastic.

Technical specifications

Charger CDA1109

Input of charger 100-240V~ 50/60Hz

40W

Output of charger 16.8V DC 1.3A

Rechargeable battery pack 16V Li-ion 1.5Ah

Chuck capacity 1.0 - 10 mm

Torque settings 17 + Drill mode

No load speed

Position 1:

Position 2:

0-350 /min

0-1300 /min

Weight (incl. battery) 1.10 kg

Sound pressure level LPA 71.59 dB(A), K=3dB(A)

Sound power level LWA 82.59 dB(A), K=3dB(A)

Hand-arm vibration ah

(screwdriving without impact) 1.065 m/s2 K=1.5 m/s2

Hand-arm vibration ah,D

(Drilling into metal) 2.390 m/s2 K=1.5 m/s2

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardized test given in

EN60745; it may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories,

may significantly increase the exposure level.

• The times when the tool is switched off or

when it is running but not actually doing the

job, may significantly reduce the exposure

level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CDM1134 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info