Bedienungsanleitung Ferm FDCS 720 L (Seite 7 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Norwegisch)

79265

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

drill is elapsed. The battery is discharged now and

needs to be charged.

In comparison to NiCd and NiMH cells, Lithium-

Ion cells have no memory effect due to

intermedial charging. While NiCd and NiMH

batteries need to be discharged before charging,

a Lithium-Ion block does not need to be

completely discharged. This battery block can be

charged at any time despite its current power

level without losing much of its original power and

endurance.

The charger is equiped with a special plug. This

Lithium Ion battery pack is only to be charged

with this dedicated charger. The intergrated

electronics in this dedicated charger are custom

made for this Lithium-Ion battery pack. Using

other chargers/adapters will cause irreversible

damage to the battery.

The internal battery can be charged in 2 different

ways:

• Plug the adapter into the desktop holder (6).

Charging will start when the adapter is

plugged to the mains supply and the tool

placed in the desktop holder (Fig. 3).

• Plug the adapter directly into the bottom of the

foot of the tool. Charging will start when the

adapter is plugged to the mains supply.

3 LED charging & battery status indication

Fig. 2

When the charger is connected, these 3 LEDs

indicate the charging status.

• When the battery is empty and charging

begins, the red LED will blink, with the yellow

and green LED off.

• When the battery is less than halfway charged,

the red LED will be on and the yellow LED will

be blinking.

• When the battery is more than halfway

charged, both the red and yellow LED will be

on and the green LED will be blinking.

• When all LEDs are lit up, charging is

completed and the battery is full.

• After 10 seconds all LEDs will switch off and

charging will stop.

When the charger is not connected, these 3 LEDs

indicate the battery status when the battery status

switch (10) is pressed.

• When the red LED lights up, the battery is

empty and needs to be charged.

• When the red and yellow LED lights up, the

battery is half full.

• When all LEDs light up, the battery is

completely full.

When the red LED continues to blink

with an interval of 2 seconds and no

other LED is lit up, a battery failure

occurred and charging has stopped.

Disconnect the charger and contact your

supplier.

5. SERVICE & MAINTENANCE

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

These machines have been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Cleaning

Keep the ventilation slots of the machine clean to

prevent overheating of the engine. Regularly

clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation

slots free from dust and dirt. If the dirt does not

come off use a soft cloth moistened with soapy

water. Never use solvents such as petrol, alcohol,

ammonia water, etc. These solvents may damage

the plastic parts.

Lubrication

The machine requires no additional lubrication.

Faults

Should a fault occur, e.g. after wear of a part,

please contact the service address on the

warranty card. Separate you nd an exploded

view showing the parts that can be ordered.

Environment

To prevent damage during transport, the

appliance is delivered in a solid packaging which

consists largely of reusable material. Therefore

please make use of options for recycling the

packaging.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm FDCS 720 L Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info