382450
3
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
54 Ferm
CIRCULAR SAW
THE PICTURES MENTIONED IN THE TEXT ARE
CORRESPONDING WITH THE PICTURES AT
PAGE 2.
SAFETY AND OPERATING INSTRUCTIONS
For your own safety and for the safety of others,
please read these instructions carefully before
using this appliance. It will help you understand your product
more easily and avoid unnecessary risks. Keep this instruction
manual in a safe place for future use.
CONTENTS
1. Machine data
2.
Safety instructions
3. Assembly and adjusting instructions
4. Operation
5. Maintenance
1. MACHINE DATA
TECHNICAL SPECIFICATION
PRODUCT INFORMATION
Fig. A.
1. Handgrip
1A.Extra handgrip
2. Type plate
3. On/off switch
4. Handle to set sawing depth
5. Power cord
6. Riving knife
7. Saw blade safety guard
8. Hexagonal bolt
9. Soleplate
10. Flange
11. Saw blade
12. Rip fence
13. Rip fence clamping knob
14. Handle to set sawing angle
- Shaft lock (Fig. C3)
UNPACKING
The circular handsaw is shipped with:
- Rip fence
- TCT Saw blade Ø 210 mm
- Box spanner
Check first whether or not the delivery has been
damaged by transport and/or whether all the parts are
present.
2. SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Keep bystanders away
Wear ear and eye protection
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
Always check that the power supply corresponds to
the voltage on the rating plate.
Class II machine – Double insulation – You don’t
need any earthed plug.
Replacing cables or plugs
If the mains cable becomes damaged, it must be replaced
with a special mains cable available from the
manufacturer or the manufacturer’s customer service.
Dispose of old cables or plugs immediately after
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1800 W
No load speed | 5000/min.
Saw blade dimensions | Ø210 x Ø30x 2,4 mm
Number of teeths | Z40
Weight | 6,4kg
Lpa (sound pressure level) | 97,2 dB(A)
Lwa (sound power level) | 110,2 dB(A)
aw(vibration value) | 1.138 m/s
2
Ferm 3
SPARE PARTS
REF.NR. DESCRIPTION FERM NR.
5 CARBON BRUSH HOLDER 409400
6 CARBON BRUSH SET (2 PCS) 409401
7 CARBON BRUSH CAP 409402
10 STATOR 409403
14 BALL BEARING 607 Z 800607
15 ROTOR 409404
16 BALL BEARING 6000 Z 806000
43+44 SWITCH + CAPACITOR 409414
55 GEAR 409416
59 BALL BEARING 6001 ZZ 806001
74 INNER FLANGE 409410
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferm fks 210 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info