TEKNISKE SPECIFIKATIONER
Spænding 230 V~
Frekvens 50 Hz
Optaget effekt 280 W
Omdrejninger, ubelastet 6000-10000/min.
Sandpapir kapacitet 115 x 230 mm
Vægt 2.1 kg
Lpa (lydtryk) 84.7 dB(A)
Lwa (lydeffekt) 97.7 dB(A)
Vibrationsværdi 6.9 m/s
2
Elektrisk sikkerhed
Kontroller altid om netspændingen svarer til værdien på
typeskiltet.
Maskinen er dobbeltisoleret i henhold til EN
50144; det er derfor ikke nødvendigt med en
jordledning.
Ved udskiftning af ledninger og stik
Kasser gamle ledninger og stik, så snart de er skiftet ud
med nye. Det er farligt at sætte et stik fra en løs ledning i en
stikkontakt.
Ved brug af forlængerledninger
Brug udelukkende godkendte forlæn gerledninger, der er
beregnede til maskinens effekt. Lederne skal have et gen-
nemsnit på mindst 1,5 mm
2
. Hvis forlængerledningen sid-
der på en tromle, rulles ledningen helt af.
BESKRIVELSE
Fig. A.
1. Tænd/sluk kontakt
2. Indstillingshjulet
3. Åbning støvsugning
4. Håndtag for papirklemme
5. Papirklemme
6. Slibesål
7. Håndgreb (bag)
8. Blokeringsknap
9. Håndgreb (for)
28 Ferm
TROUBLESHOOTING
In case the sanding machine does not work well, we give
you some possible causes and solutions.
1. The electromotor gets hot.
The cool ventilation slots in the motor are stopped up
with dirt
- clean the cool ventilation slots
The motor is defect.
-Have your sanding machine repaired or checked
by your local Ferm dealer.
2. The connected machine does not work.
Interruption in the mains connection.
- Check mains connection for fracture;
- Have your sanding machine repaired/checked by
your local Ferm dealer.
3. The dust is not absorbed:
This can be caused by a stopped up dust extraction.
-Clean your dust collection opening.
Repairing of electric appliances may be carried
out only by experts.
MAINTENANCE
Make sure that the machine is not live when car-
rying out maintenance work on the motor.
The Ferm machines have been designed to operate over
a long period of time with a minimum of maintenance. Con-
tinuous satisfactory operation depends upon proper ma-
chine care and regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to prevent
overheating of the engine.
Regularly clean the machine housing with a soft cloth, pre-
ferably after each use. Keep the ventilation slots free from
dust and dirt.
If the dirt does not come off use a soft cloth moistened with
soapy water. Never use solvents such as petrol, alcohol,
ammonia water, etc. These solvents may damage the
plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please con-
tact your local Ferm dealer.
In the back of this manual you find an exploded view
showing the parts that can be ordered.
ENVIRONMENT
In order to prevent the machine from damage during trans-
port, it is delivered in a sturdy packaging. Most of the pack-
aging materials can be recycled. Take these materials to
the appropriate recycling locations.
Take your unwanted machines to your local Ferm-dealer.
Here they will be disposed of in an environmentally safe
way.
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
ClEl
■
DECLARATION OF CONFORMITY
(
GB
)
We declare under our sole responsability that this
product is in conformity with the following
standards or standardized documents
EN50144-1, EN50144-2-4,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
in accordance with the regulations.
98/37EEC,
73/23EEC,
89/336EEC
from01-07-2002
GENEMUIDEN NL
W. Kamphof
Quality department
Ferm 5
