Bedienungsanleitung Ferm jsm1014 fdjs-710 (Seite 6 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Norwegisch)

382569

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Kickback is usually caused by:

- unintentionally touching hard objects or

materials with the rotating saw blade;

- a blunt saw blade;

- a saw blade that is not properly mounted;

- sawing into a previous cut;

- a lack of attention to the operation;

- an instable stance.

ELECTRICAL SAFETY

Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

● Do not use the machine if the mains cable or

the mains plug is damaged.

● Only use extension cables that are suitable for

the power rating of the machine with a minimum

thickness of 1.5 mm

. If you use a extension

cable reel, always fully unroll the cable.

Mains plug replacement (UK only)

If the moulded 3-pin plug attached to the unit is

damaged and needs replacing, it is important that

it is correctly destroyed and replaced by an

approved BS 1363/5A fused plug and that the

following wiring instructions are followed.

The wires in the mains cable are coloured in

accordance with the following code:

blue neutral

brown live

As the colours of the wires in the mains cable of

the unit may not correspond to the coloured

markings identifying the terminals in the plug,

proceed as follows:

- The wire which is coloured blue must be

connected to the terminal which is marked with

the letter N or coloured black.

- The wire which is coloured brown must be

connected to the terminal which is marked with

the letter L or coloured red.

TECHNICAL DATA

FDJS-710

Mains voltage V~ 230

Mains frequency Hz 50

Power input W 710

No-load speed min

-1

800 - 3,000

Max. sawing depth (wood) mm 110

Max. sawing stroke mm 20

Mitre angle ° 45

Number of pendulum positions 4

Weight kg 2.55

NOISE AND VIBRATION

FDJS-710

Sound pressure (L

) dB(A) 91

Acoustic power (L

) dB(A) 102

Uncertainty (K) dB(A) 3

Vibration (wood) m/s

7.1

Vibration (metal) m/s

10.2

Uncertainty (K) m/s

1.5

Wear hearing protection.

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in EN

60745; it may be used to compare one tool with

another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may signicantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

signi cantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

DESCRIPTION (FIG. A)

Your pendulum action jigsaw has been designed

for sawing wood, metal, plastics, ceramics,

rubber, etc. to any required size and in any

required shape.

1. On/off switch

2. Lock-on button

3. Speed adjustment wheel

4. Pendulum action switch

5. Guard

6. Saw blade holder

7. Saw shoe

8. Locking bolt for parallel guide

9. Dust extraction connection

10. Grip

11. Allen key

12. Allen key holder

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm jsm1014 fdjs-710 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info