Bedienungsanleitung Ferm LBM1008 - FLB 2500 (Seite 5 von 24) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

632706

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Class II machine – Double insulation –

You don’t need any earthed plug.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet. If you have to rewire at any time

please connect as follows.

Attach the blue cable

(Neutral) to the terminal marked N or coloured

black or blue. Attach the brown cable (Live) to

the terminal marked L or coloured red or brown.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine.

The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

3. ASSEMBLY

Assembly vacuum tube

Fig. 1

1. Pull the tube out of the housing until the

marking.

Allign the holes

3. Fix the tube onto the housing using enclosed

the screws.

4. Cover the screws using the enclosed

screwcovers.

5. The screws can be removed for easier

storage.

Attach the collection bag

Fig. 3

Always use the collection bag when

using vacuum mode.

Attach the hook to the upperpart of the housing.

Slide the open end of the collection bag over the

tube and connect it to the housing. Attach the hook

to the lower part of the housing.

Always check the vacuum bag for signs

of damage before each use. Small,

sharp objects can be sucked up and if

the bag is damaged or worn the objects

might be thrown in your direction or the

direction of others. This could lead to

serious injury so please check. If your

bag is damaged or badly worn please

replace it with a new one.

4. OPERATION

Operation

Fig.2

Plug in your appliance at the mains (or extension

lead) and when you are ready and well balanced,

press the ON/OFF button (5) and it will start.

Press again to turn it of

Note: We recommend the use of a heavy-duty

outdoor extension cable.

Alter the harness length so that you can stand up

straight and allow the blower to rest on its wheels

when in use.

This will lighten the load across

your shoulders and back. Use in a forward and

backward direction, not side to side.

Changing operation mode (blow/vac)

Fig.2

When you want to change from one mode to

another

, simply pull the option level to suit your

requirement. Turn it clockwise to blower mode

and anti-clockwise to vacuum mode (remember

to fit the bag if you want vacuum mode).

Speed dial

Fig.1

Your blower/vac has a variable speed dial (6)

which can be used as conditions dictate.

5. SERVICE & MAINTENANCE

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

This machine has been designed to operate over

a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Ferm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm LBM1008 - FLB 2500 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info