50 Ferm
MITRE SAW MACHINE
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
CAUTION!
For your own safety, carefully read these
instructions for use before using the machine.
CONTENTS:
1. Machine information
2. Safety
3. Mounting accessories
4. Operation
5. Service & Maintenance
1. MACHINE INFORMATION
INTRODUCTION
The mitre saw machine is designed for sawing wood and
woody pieces of work.
TECHNICAL SPECIFICATION
LIST OF PARTS
1. Handgrip with switch
2. Unlock button
3. Motor housing (carbon brush cover)
4. Blade protective cover
5. Cutting head unlock button
6. Extension pieces (left and right)
7. Clamp
8. Clamp holes
9. Knobs for setting the sawing angle
10. Saw blade lock
11. Rotary knob for mitre sawing
12. Dust bag
13. Stop
14. Screw
15. Saw blade bolt
16. Flange
17. Hood
18. Laser switch
19. Bolts (Allen key)
PACKAGE CONTENTS
1 Mitre saw
1 Dust bag
1 Clamp
2 Extension pieces + 2 clamps
4 Rubbers
1 Allen key
1 Key for changing the saw blade
1 Instructions for use
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for any
transport damage.
2. SAFETY
When using the machine, always carefully follow
the safety precautions supplied and the safety
instructions given below.
LIST OF SYMBOLS
The following pictograms are used in these instructions
and on the machine itself:
CE Conforms to the applicable European safety
standards
Class II equipment – doubly insulated – the plug
does not have to be earthed
Danger of bodily injury or material damage.
Read the instructions
Keep bystanders at a distance
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Wear eye and ear protectors
Caution! Laser beam! Never look into the light
beam and never aim the laser at a person when it is
switched on.
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
BEFORE EACH USE OF THE SAW
Check the machine. If any part of the machine is missing,
bent or in any other way unusable, or when an electrical
defect occurs, turn the machine off and take the plug out
of the socket. Replace all missing, damaged or defective
parts before using the machine again.
To fix the saw blade in the slot and to prevent the piece
of work from moving, follow the instructions below.
Voltage | 230 V~
Power consumption | 1400 W
Revolutions, not under load | 4500/min
Saw blade dimensions | 250 x 16 mm
Max. saw capacity 90º | 125 x 65 mm
Max. saw capacity 45º | 85 x 40 mm
Weight | 12 kg
Lpa (sound pressure) | 92,0 dB(A)
Lwa (acoustic capacity) | 105,0 dB(A)
Vibration level | 1,72 m/s
2
Ferm 3
RENGØRING
Maskinhuset skal jævnligt rengøres med en blød klud, og
helst hver gang den har været brugt. Sørg for, at
ventilationsrillerne er rengjorte for støv og snavs.
Hårdnakket snavs fjernes med en blød klud, vredet op i
sæbevand. Der må ikke bruges opløsningsmidler som
f.eks. benzin, sprit, salmiakspiritus o.l. Sådanne
opløsningsmidler kan beskadige dele af plastic.
SMØRING
Maskinen skal ikke smøres.
FEJL
Skulle en fejl opstå, f.eks. pga. slidtage af en enhed,
kontakt venligst serviceadressen på garantibeviset. På
bagsiden af denne manual finder du en tegning med alle
dele, der kan bestilles.
MILJØ
For at undgå transportskader leveres maskinen i en solid
kasse. Emballagen er så vidt muligt fremstillet af
genbrugsmateriale, så sørg for, at emballagen afleveres
til en genbrugsplads. Når maskinen skal kasseres, skal
man tage den med til den lokale Ferm forhandler. Her
sørges der for miljøvenlig bortskaffelse af maskinen.
GARANTI
Garantibetingelserne findes på garantibeviset bag i
denne brugsanvisning.
Hermed bekræfter vi på eget ansvar, at dette produkt er
i overensstemmelse med følgende standarder eller
relaterede dokumenter:
EN61029-1, EN61029-2-9, EN55014-1,
EN55014-2, EN61000-3-2, EN61000-3-3
EN60950: 1992 + A1 _ A4 + A11
EN60825-1: 1994, EN60825-1/A11 1996
i overensstemmelse med bestemmelserne i
direktiverne:
98/37/EEC, 73/23/EEC, 89/336/EEC
fra 01-04-2004
ZWOLLE-NL
W. Kamphof
Kvalitetsafdeling
CE
ı
KONFORMITETSERKLÆRING
(
DK
)
