Bedienungsanleitung Ferm MSM1039 (Seite 4 von 108) (Alle Sprachen)

697795

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

RADIAL MITRE SAW

MSM1039

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are manu-

factured according to the highest standards of

performance and safety. As part of our philosophy

we also provide an excellent customer service,

backed by our comprehensive warranty.We hope

you will enjoy using this product for many years

to come.

The numbers in the following text refer to the

pictures on page 2-3

Read the operating instructions carefully

before using this device. Familiarise

yourself with its functions and basic

operation. Service the device as per the

instructions to ensure that it always func-

tions properly. The operating instructions

and the accompanying documentation

must be kept in the vicinity of the device.

Intended use

The electro tool is intended as a stationary

machine for making straight lengthways and

crossways cuts in wood. Horizontal mitre angles

of -45° to +45° as well as vertical bevel angles of

-45° are possible.

This saw is intended for sawing wood

only. Do not use the saw to cut materials

other than wood.

1. MACHINE INFORMATION

Technical specifications

Mains voltage 220-240V~, 50Hz

Capacity 1500 W

Machine class II (double insulated)

No load speed 4.500/min

Saw blade measurement 210x30x2.8mm

Angle for mitring 45º (left and right)

Angle for bevelling 45º (left only)

Mitre saw maximum sawing capacity:

Mitre 0º, Bevel 0º 70x305mm

Mitre 0º, Bevel 45º 35x305mm

Mitre 45º, Bevel 0º 70x210mm

Mitre 45º, Bevel 45º 35x210mm

Weight 12 kg

Lpa (sound pressure) 93.6+3 dB(A)

Lwa (acoustic capacity) 106.6+3 dB(A)

Vibration level

The vibration emission level stated in this instruction

manual has been measured in accordance with a

standardised test given in EN 61029-1; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

significantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping your

hands warm, and organizing your work patterns.

Features

Figs. 1, 2, 3, 4 and 5

1. On/off switch

2. On/off switch for laser

3. Lock-off button

4. Carbon brush cover

5. Lock-pin

6. Blade protective cover

7. Workpiece clamp

8. Guide fence

9. Knob adjusting saw angle

10. Locking knob

11. Locking paddle

12. Knob over sliding support

13. Connection dust bag

14. Bevel angle

16. Cover

17. Saw blade bolt

18. Flange

19. Screw

20. Screw retraction arm

21. Extension pieces (left and right)

22. Lock-button saw blade

23. Angle indicator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm MSM1039 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info