Bedienungsanleitung Ferm TCM1011 (Seite 4 von 40) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

510126

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

4 Ferm

Specific safety instructions

• Check your powertool for damage before

starting your work, particularly the diamond

blade. All parts must be fitted properly and

must meet all requirements in order to

guarantee the tool’s smooth operation. Any

safety guards or any lightly damaged parts

must be checked to see if they still function

properly before continuing the use of the tool.

Moving parts, and the diamond-blade guard in

particular, must be fitted properly and must not

jam. Do not use tools that cannot be switched

on or off with the switch.

• The diamond-blade guard must not be

jammed or removed.

• A jamming guard must be repaired

immediately.

• The riving knife must not be removed.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Connecting to the power supply

Check that the power supply and plug used in

accordance with tour tool. Have a look at the rating

plate on the tile cutter. Any changes should always

be carried out by a qualified electrician.

We strongly recommend the use of an

RCD (Residual Current Device) of not

more than 30 mA, at the plug socket

when using this appliance.

Warning! This machine must be earthed.

If not properly earthed this machine can cause an

electrical shock. Be sure that the power supply

outlet is earthed. If there is any doubt, have it

checked by a qualified electrician.

Warning! Avoid contact with the

terminals on the plug when installing

(removing) the plug to (from) the power

supply outlet. Contact will cause a severe

electrical shock.

Replacing cables or plugs

Immediately throw away old cables or plugs when

they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in the

wall outlet.

Using extension cables

Only use an approved extension cable suitable for

the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

PRCD

Portable residual current device

Connection to water supply

1) For tools intended to be connected to a water

supply, instructions for the connection to the

water supply, the use of the water and the use

of attachments to comply with 14.5 in order to

avoid affection of the tool by water, the

inspection of hoses and other critical parts

which could deteriorate and the maximum

permitted pressure of the water supply.

2) For tools intended to be connected to a water

supply, the substance of the following

instructions, if applicable:

• For tools provided with a PRCD: Never use

the tool without the PRCD delivered with the

tool,

• For tools provided with an isolating

transformer: Never use the tool without the

transformer delivered with the tool or of the

type as specified in these instructions,

• Replacement of the plug or the supply cord

shall always be carried out by the

manufacturer of the tool or his service

organisation,

• Keep water clear off the electrical parts of the

tool and away from persons in the working

area.

3. Assembly

Assembly

Fig.1

• Mounting the riving knife.

• Unscrew the two (crosshead) screws (9) and

place the foot of the riving knife (10) under the

table.

• Place the small plate (2 holes with thread)

under the foot of the riving knife.

• Connect the riving knife with the two screws

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm TCM1011 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ferm TCM1011

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info