Ferm 15
ROLLEY JACK
TECHNICAL SPECIFICATIONS FRJ-3.0
TECHNICAL SPECIFICATIONS FRJ-2.25
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
KNOW YOUR APPARATUS
Observe the instructions for maintenance to ensure
your apparatus always operates properly.
Before attempting to operate the rolley jack, familiarise
yourself with the controls. Save this user’s manual and
the other documents supplied with this tool for future
reference.
GENERAL SAFETY RULES
• Keep the work area clean.
A cluttered work area may cause accidents.
Make sure the work area is well-lit.
• Keep children away.
• Never allow children or spectators to touch the
tools, keep them at a safe distance from the work
area.
• Store tools in a safe place.
• Tools that are not used must be stored in a dry and
locked placed, out of the reach of children.
• Do not force the tool.
• The machine will do the job better and safer at the
rate for which it was intended. Damage caused by
forcing the tool is not covered by the warranty.
• Use the right type of tool.
• Do not use low-powered tools for heavy-duty ope-
rations. Never use the machine other than for its
intended purpose.
• Posture.
• Do not over-reach. Be sure of your footing and
balance at all times.
• Maintain the tool with care.
• The tool works best and safest if it is kept clean. Keep
the tool dry and free from oil and grease.
• Stay alert.
• Watch what you are doing, use your common sense,
do not operate the tool when you cannot concen-
trate on the job.
• Check the machine for damage.
Before starting the machine, check that all safety devi-
ces and damaged parts operate smoothly and effi-
ciently.
Make sure all moving parts are in good working order.
Check the machine for any broken or jamming parts,
make sure all parts are fitted properly and any other
conditions that might affect the functioning of the tool
are favourable.
• Have your tool repaired by an expert!
• This electric appliance is in accordance with the rele-
vant safety rules. Repairing of electric appliances may
be carried out only by experts other wise it may
cause considerable danger for the user.
SPECIAL SAFETY RULES
Non-observance of the following instructions can
cause personal injuries and/or damage to the vehicle.
• Place the saddle of the jack only in the spot designed
for this purpose. For the relevant jacking points ple-
ase refer to your car instructions.
• The maximum load indicated on the jack must never
be exceeded.
• The jack must be used as a lifting device only.
• Always place the jack on a hard and level surface.
• Always protect the car from rolling away. Before jac-
king up the car, place chocks behind and in front of
the wheels remaining on the ground. Put the car in
first gear or put on the handbrake to further block
the car.
• Make sure to place the jack in such a way that your
hand is not underneath the car when jacking it up.
• Make sure the jack is horizontal.
• For your own safety, before working or crawling
underneath the car jackup the car and support the
shafts.
• Before using the shaft supports make sure they are in
good condition.
Max. lifting load (kg) | 2250
Min. disc height (mm) | 140
Max. disc height (mm) | 495
Weight (kg) | 35
Max. lifting load (kg) | 3000
Min. disc height (mm) | 150
Max. disc height (mm) | 510
Weight (kg) | 39,5
