FWS-125/3K 45
STATEMENT OF CONFORMITY of FWS-125/3K
Statement of conformity
We declare that the conforms to the following standards
or standard-setting documents:
EN50144-1, EN50144-2-3,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
according to the requirements laid down in the directi-
ves
98/37/EC, 73/23/EEC, 89/336/EEC,
2002/95/EC, 2002/96/EC
from 01-01-2007.
ZWOLLE NL
J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm BV Quality Manager Ferm Global
Guarantee
For the conditions of guarantee, please refer to the
separately provided guarantee card.
Konformitätserklärung
Wir erklären, dass dieses Produkt mit den folgenden
Normen oder normativen Dokumenten übereinstimmt:
EN50144-1, EN50144-2-3,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
Gemäß der Bestimmungen der Richtlinien:
98/37/EC, 73/23/EEC, 89/336/EEC,
2002/95/EC, 2002/96/EC
ab 01-01-2007.
ZWOLLE NL
J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm BV Quality Manager Ferm Global
Garantie
Lesen Sie die Garantiebedingungen auf der separat bei-
gefügten Garantiekarte.
Conformiteitsverklaring
Wij verklaren dat dit product voldoet aan de volgende
normen of normatieve documenten
EN50144-1,EN50144-2-3,
EN55014-1,EN55014-2,
EN61000-3-2,EN61000-3-3
overeenkomstig de bepalingen in de richtlijnen
98/37/EC, 73/23/EEC, 89/336/EEC
2002/95/EC, 2002/96/EC
vanaf 01-01-2007.
ZWOLLE NL
J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm BV Quality Manager Ferm Global
Garantie
Lees voor de garantievoorwaarden de apart bijgevoegde
garantiekaart.
Déclaration de conformité
Nous déclarons que ce produit est conforme aux
normes suivantes ou aux documents fixant les nor-
mes:
EN50144-1, EN50144-2-3,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
Conformément aux conditions requises détaillées
dans les directives.
98/37/EC, 73/23/EEC, 89/336/EEC,
2002/95/EC, 2002/96/EC
du 01-01-2007.
ZWOLLE NL
J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm BV Quality Manager Ferm Global
Garantie
Pour les conditions de la garantie, veuillez vous repor-
ter à la carte de garantie fournie séparément.
16 Avoid unintentional starting
• Never carry a connected machine with a finger on
the switch. Make certain that the switch is in the
“OFF” position,before connecting the machine to
the power supply.
17 Use outdoor extension cords
• Whenever you use the tool outdoors,always use
extension cords specifically designed for outdoor
use.
18 Stay alert
• Watch what you are doing.Use your common sen-
se.Do not use the tool when you are tired.
19 Inspect damaged parts
• Before making further use of the tool,if any safety
feature such as a protective cover or other part has
been damaged, make absolutely certain that the
machine is still safe to use,and that the part can still
perform its protective function.
• Check the alignment and free movement of mo-
ving parts,possible breakage of parts,attachments
and any irregularities that could adversely affect
operation.
• A safety cover or any other damaged part should
be properly repaired or replaced by an authorised
service agent, unless otherwise directed in these
directions.
• Have any defective switches replaced by an autho-
rised service agent.
• Never use the tool whenever the tool cannot be
switched “ON” or “OFF” with its own switch.
20 Caution
• Use of any part or accessory,other than described
in these instructions for use, may possibly lead to
bodily injury.
21 Have your machine repaired by a qualified service
agent
• This electric tool is manufactured in conformance
with the relevant safety requirements.
Only a qualified serviceman using original spare
parts should carry out repairs,as inexpert repair
will cause considerable risk for the user.
Use
Cutting of channels in materials such as concrete,ma-
sonry and paving,without the use of water,with a guide
wheel. Never drill,cut or chase in surfaces,in which
electrical cabling, gas or water pipes could
be concealed.Always use a suitable detector
to seek out concealed wiring or piping,or obtain advi-
ce from the local energy or water company.
Do not overload the machine.
Check the following steps when the rotational
speed decreases during your work:
- Lift the machine a little.Wait until the machine rea-
ches his maximum rotational speed before conti-
nuing your work.
- Adjust the cutting depth (less deep) and cut the
groove in several steps.For example:start with 8
mm,next 20 mm and finally 30 mm.
- Only cut grooves in straight lines. Overloading
from the side of the blades results in friction,which
can damage the cutting blades and the machine.
FWS-125/3K
4
GENERAL SAFETY INSTRUCTIONS
