497581
10
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
10
CXS
GB
Original operating manual
1Symbols
2 Technical data
* Speed specifications with fully charged bat-
tery pack.
3 Machine features
The specified illustrations appear at the begin-
ning of the Operating Instructions.
4 Intended use
Cordless drill suitable for
drilling in metal, wood, plastic and similar
materials,
inserting and tightening screws
Charger MXC suitable
for charging the listed battery packs.
only for internal use.
The user is liable for improper or non-in-
tended use; this also includes continu-
ous industrial operation.
5Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings
and all instructions.
Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
Wear protective gloves.
Wear protective goggles.
Do not throw in the household waste.
Cordless drill CXS
Motor voltage 10.8 V
Idling speed* 1st gear 0 - 400 rpm
2nd gear
0 - 1200 rpm
Max. torque
soft/ hard material 10/ 16 Nm
Adjustable torque 0.2 - 2.4 Nm
Chuck clamping range 1 - 8 mm
Drill diameter max.
Wood/ Metal 12/ 8 mm
Tool holder in drill spindle 1/4 ’’
Weight without battery
pack with Centrotec
0.7 kg
Charger MXC
Mains voltage (input) 220 - 240 V ~
Mains frequency 50/60 Hz
Charging voltage (output) 10.8 V=
Rapid charging typ. 2.8 A
Charging times for
LiIon 1,5 Ah, 80 %/ 100 %
approx. 23/ 35
min
Permitted operating tem-
perature range
-10 °C to
+4C
Temperature monitoring via NTC-resistor
Battery pack BP-XS
Voltage 10.8 V
Capacity 1.5 Ah
Number of cells 3
Permitted battery tempera-
ture for charging
0 °C to
+4C
Weight 0.2 kg
[1-1]
Torque thumbwheel
[1-2]
Drilling symbol
[1-3]
Torque/drilling position marking
[1-4]
Gear switch
[1-5]
Right/left switch
[1-6]
On/Off switch
[1-7]
Belt clip
[1-8]
Button for releasing the battery pack
[1-9]
Bit store
[1-10]
LED lamp
[3]
Wall mount
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Festool Cxs wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info