Bedienungsanleitung Festool DWC 18-2500 (Seite 15 von 99) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

574919

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

4 Machine features

[1-1] Bit storage

[1-2] Switch

[1-3] Forward / reverse switch

[1-4] AUTO/MAN switch

[1-5] Depth stopper

[1-6] Bit

[3-1] LED

[3-2] Cable holder

[3a] Wall mount

The accessories shown or described do not have

to be included with the supplied tool. The speci-

ﬁ ed illustrations appear at the beginning of the

Operating Instructions.

5 Intended use

The drywall screwdriver is designed for the fol-

lowing works:

Main application Screw types Type

DWC 18-2500

DWC 18-4500

Gypsum plas-

ter boards on

metal proﬁ le rails

(≤ 0.88 mm)

Drywall screws

with ﬁ ne thread

Gypsum plas-

ter boards on

metal proﬁ le rails

(≤ 2.25 mm)

Drywall screws,

self-drilling

Gypsum plaster

boards on wooden

constructions

Drywall screws

with coarse

thread

Gypsum ﬁ bre

boards on metal

and wooden con-

structions

Drywall screws

with milling ribs

Chip boards/OSB

on wooden con-

structions

Wood construc-

tion and chip

board screws up

5 mm

Charger TCL 3 suitable for

– charging Festool battery packs: BP, BPS and

BPC (NiMH, NiCd, li-ion are recognised auto-

matically.)

– indoor use only.

The user is liable for improper or non-in-

tended use; this also includes continuous

industrial operation.

6 Commissioning

6.1 Charger cable holder [3-2]

Unwind the cable completely from the re-

cess before using the charger.

6.2 Changing the battery pack

Removing the battery pack [2 A]

Inserting the battery pack [2 B]

 Battery pack is ready for use immediately upon

delivery and can be charged at any time.

6.3 Charging the battery pack [3]

The LED [3-1] on the charger indicates the re-

spective operating status of the charger.

LED yellow – lit continuously

Charger is ready to use.

LED green – ﬂ ashing quickly

Battery pack is charged to max-

imum capa city.

LED green – ﬂ ashing slowly

Battery pack is charged with re-

duced current, LiIon is charged

to 80 %.

LED green – lit continuously

Charging is complete or is not

restarted as current charge

status is greater than 80%.

LED red – lit continuously

Battery temperature is outside

the permitted range.

LED red – ﬂ ashing

General fault display, e. g. in-

complete contact, short circuit,

battery pack faulty, etc..

7 Power tool settings

 Setting must be done only when the power tool

is turned off and will be accepted only after

restarting it.

6.1 Changing the direction of rotation [1-3]

Move switch from right to left = clockwise rotation;

Move switch from left to right = anticlockwise ro-

tation.

8 Tool holder, attachments

8.1 Bit holder

The bit holder is used for fast replacement of bits.

CAUTION

Risk of cutting injuries when changing the tool!

 Wear protective gloves!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool DWC 18-2500 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info