Bedienungsanleitung Finicompressors Artic 134-25 (Seite 3 von 11) (Englisch)

456446

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Cod. 710.056.02.00 – Rev. 04 – 07.06.2001

ENGLISH

page 14 of 63

1. GENERAL INFORMATION

1.1 FUNCTIONAL DESCRIPTION

Drying systems with refrigeration cycle have been designed for a cost effective elimination, with minimal overall

dimensions, of the condensate contained in compressed air by cooling it down to approximately + 3°C.

The operation principle of the dryers described in this manual is shown in the air and refrigeration circuit diagrams

(attachment A).

The air delivered to the services is virtually humidity free, and the condensate collected in the separator is discharged

through appropriate draining devices. In order to limit the size of the machine and to avoid condensation on the

external surface of the tubing, before exiting the dryer, treated air is counter current pre-heated by the air entering the

system.

The dryer comes provided with all the control, safety and adjustment devices, therefore no auxiliary

devices are needed.

A system overload not exceeding the maximum operative limits can worsen the operational performances of

the dryer (high dew point), but it will not affect its safety.

The electric diagram (attachment B) shows the minimum protection degree IP 42. The user must provide

the dryer with a line protection and a ground terminal.

1.2 USE OF THE MACHINE IN SAFE CONDITIONS

This system has been designed and manufactured in compliance with the European safety directive in force, therefore

any installation, use and maintenance operations must be performed respecting the instructions contained in this

manual.

Any installation, use and maintenance operation requiring to access the internal parts of the dryer must be

performed by qualified personnel.

The manufacturer will not be liable in case of uses different or nor complying with those foreseen in this

manual.

2. INSTALLATION

2.1 ACCEPTANCE AND TRANSPORTATION

At the moment the customer accepts the delivery, he must fully inspect the dryer to verify its integrity and the presence

of all the items listed in the shipping documentation.

Eventual claims for missing and/or damaged parts must be addressed directly to our facility or to the closest

reseller, within 8 (eight) days from the date on which the goods have been received.

It is mandatory to keep the dryer always in vertical position, as indicated by the symbols present on the packaging. For

eventual displacements, use devices having sufficient capacity for the weight of the machine.

Remove the packaging after having positioned the dryer in the installation site. We suggest to keep the original

packaging at list for the duration period of the warranty of the machine. Anyhow, do not forget to dispose the various

materials in compliance with the relevant rules locally in force.

If not in use, the dryer can be stored in its packaging in a dust free and protected site at a maximum temperature of 50

°C, and a specific humidity non exceeding the 90 %. Should the stocking time exceed 12 months, please contact the

manufacturer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finicompressors Artic 134-25 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Finicompressors Artic 134-25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info