Bedienungsanleitung Finlux ID-F610 (Seite 4 von 7) (Englisch)

584084

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

E-7

OPERATION OF RADIO

- PRESS THE "ON/STANDBY" KEY ONCE TO SWITCH ON THE UNIT.

- PRESS THE KEY REPEATEDLY UNTIL THE DISPLAY SHOWS THE RADIO

FREQUENCY.

- TO IMPROVE FM-RADIO RECEPTION, FULLY EXTEND THE FM-ANTENNA WIRE

AND ADJUST IT'S POSITION.

- USE THE FM MODE KEY TO SELECT THE DESIRED MODE ( .

IN SOME CASES, WHERE RECEPTION IS POOR, IT MAY BE ADVISABLE TO SELECT

“MONO” MODE, TO IMPROVE CLARITY OF THE RADIO SIGNAL.

FM MONO/STEREO)

MANUAL FREQUENCY ADJUSTMENT (SCAN MODE)

- PRESS (AND IMMEDIATELY RELEASE) THE

TO "SCAN" (MANUALLY ADJUST) THE RADIO FREQUENCY "UP" OR "DOWN"

BY 1-STEP AT A TIME.

- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY AT EACH

STEP’S POSITION.

- WHEN A DESIRED FREQUENCY OR STATION IS REACHED. IT CAN BE SAVED

INTO ONE OF THE "MEMORY" POSITIONS. (SEE "RADIO MEMORY" SECTION).

TUNE UP OR TUNE DOWN

KEYS

AUTOMATIC FREQUENCY ADJUSTMENT (SEEK MODE)

- PRESS AND HOLD (FOR 2 SECONDS) THE

KEYS TO "SEEK" (AUTOMATICALLY ADJUST) THE RADIO FREQUENCY "UP" OR

"DOWN" TO THE NEXT AVAILABLE RADIO STATION.

- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY OF THE

NEXT STATION THAT IS FOUND.

- WHEN A DESIRED STATION IS REACHED. IT CAN BE SAVED INTO ONE OF THE

"MEMORY" POSITIONS. (SEE "RADIO MEMORY" SECTION).

TUNE UP OR TUNE DOWN

FUNCTION

RADIO MEMORY (STATION PRESET MEMORY STORAGE)

- AT ANY TIME, THE CURRENTLY DISPLAYED STATION OR FREQUENCY CAN BE

STORED INTO ONE OF THE MEMORY POSITION.

- PRESS KEY ONCE.

- PRESS THE OR KEY TO SELECT THE DESIRED MEMORY POSITION

TO SAVE THE RADIO STATION.

- TO CLEAR THE MEMORY OF ANY POSITION, SIMPLY SAVE A NEW STATION TO

THE SAME MEMORY POSITION.

(ON REMOTE CONTROL)

- PRESS KEY ONCE TO SAVE THE SELECTED STATION INTO THE

SELECTED MEMORY POSITION.

TO RECALL A STATION IN MEMORY, PRESS & HOLD FOR 3 SECONDS,

PRESS OR KEY TO SELECT DESIRED MEMORY STATION. (THERE

ARE 30 MEMORY POSITIONS FOR FM BAND). THEN PRESS THE FUNCTION KEY

AGAIN TO HAVE THE KEYS CONTROL THE VOLUME OF THE UNIT ONCE AGAIN.

MEM/ PROG.

ELECTRONIC VOLUME CONTROL

- THIS UNIT USES AN ELECTRONIC VOLUME CONTROL .

- TO INCREASE OR DECREASE THE LOUDNESS OF UNIT, PRESS

THE VOLUME UP (VOL +) OR VOLUME DOWN (VOL -) KEYS RESPECTIVELY.

- RELEASE THE KEY WHEN VOLUME LEVEL IS AT THE DESIRED LOUDNESS.

- SOMETIMES, ESPECIALLY DURING LISTENING TO THE RADIO, YOU MAY NOTICE

A "CLICK-CLICK-CLICK" (REPEATING) SOUND WHEN YOU ARE INCREASING OR

DECREASING THE VOLUME. THIS IS A NORMAL CONDITION & THE SOUND WILL

DISAPPEAR WHEN YOU RELEASE THE VOLUME KEY (WHEN YOU REACH THE

DESIRED VOLUME LEVEL).

(PUSH BUTTON TYPE)

- TURN ON BOTH THE UNIT AND THE iPod/ iPhone .

- PRESS THE KEY REPEATEDLY UNTIL THE DISPLAY SHOWS iPod .

- THE UNIT WILL AUTOMATICALLY START PLAYBACK OF THE SONGS.

- THE iPod DISPLAY WILL INDICATE THE INFORMATION OF THE CURRENT

SONG (TRACK).

/ iPhone

/iPad

- AT ANYTIME DURING PLAYBACK, PRESS THE PLAY/ PAUSE KEY

TO PAUSE OPERATION OF THE UNIT. PRESS PLAY/ PAUSE KEY TO RESUME

OPERATION AT THE SAME TRACK & POSITION.

- AT ANYTIME DURING PLAYBACK, PRESS & HOLD THE PLAY/ PAUSE KEY

TO STOP PLAYBACK OF UNIT.

- AT ANYTIME DURING PLAYBACK, PRESS AND RELEASE THE

KEYS TO SKIP FORWARD OR BACKWARDS BY ONE TRACK,

AS DESIRED.

TUNE UP OR

TUNE DOWN

- ANY ANYTIME DURING PLAYBACK, PRESS AND HOLD THE

KEYS ON UNIT TO FAST-FORWARD (CUE) OR FAST-REVERSE

(REVIEW) THE SPECIFIC TRACK, WHICH IS CURRENTLY PLAYING.

TUNE UP OR

TUNE DOWN

/iPad

PLAY/ PAUSE

/iPad

- YOU CAN OPERATE THE iPod USING EITHER THE SET, REMOTE CONTROL

OR DIRECTLY WITH THE iPod ITSELF.

- WHEN THE iPod HAS BEEN CONNECTED WITH THE UNIT, IT WILL START

CHARGING THE BATTERY OF THE iPod .

/ iPhone

- NEVER REMOVE (OR UNPLUG) THE iPod/ iPhone FROM THE SET DURING

PLAYBACK, ALWAYS PRESS & HOLD FOR 2 SECONDS THE KEY

FIRST AND THEN PRESS THE KEY TO SWITCH TO ANOTHER SOURCE

(EG. "RADIO" OR "AUX") BEFORE REMOVING OR UNPLUGGING THE iPod/ iPhone ,

TO PREVENT DAMAGE TO YOUR SONG FILES OR MEMORY DEVICES.

REPEAT PLAYBACK FUNCTION (iPod/ iPhone/ iPad)

- AT ANYTIME DURING iPod/ iPhone/ iPad PLAYBACK:

- PRESS THE KEY ON REMOTE CONTROL OR

PRESS THE FOLLOWING SYMBOLS ON THE iPod/ iPhone SCREEN:

= TO REPEAT THE CURRENT TRACK

/iPad

= TO REPEAT ALL TRACKS

“Made for iPod,” “Made for iPhone,” and “ mean that an electronic accessory has

been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified

by the developer to meet Apple performance standards. Apple is not responsible for the operation

of this device or its compliance with safety and regulatory standards.

Made for iPad,”

Please note that the use

of this accessory with iPod, iPhone, or iPad may affect wireless performance.

E-8

FUNCTION

REPEAT

OPERATION WITH THE iPod/ iPhone/ iPad

THIS UNIT IS DESIGNED TO ALLOW YOU TO CONNECT AN WITHOUT THE

NEED FOR DOCK CONNECTORS. THE DESIGN OF THE UNIT HAS BEEN STRUCTURED

TO PROVIDE SUPPORT TO TE CONNECTOR UNDER NORMAL USAGE WITHOUT EXCESSIVE

PRESSURE ON THE WHEN CONTROLLING PLAYBACK USING

THE SCREEN.

iPod/ iPhone/ iPad

iPod/ iPhone

/iPad

FUNCTION

MEM +

MEM -

MEM/ PROG.

MEM +

MEM -

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Finlux ID-F610 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info