Bedienungsanleitung Fiskars StaySharp Max - 6201 (Seite 3 von 10) (Englisch)

714368

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers

Mower Anatomy

Key Components

Being familiar with the parts and technologies of your

reel mower will make assembly and maintenance

much easier. Review the components shown on these

illustrations and refer to them as needed when following

steps outlined in this manual.

Note: If a clear reel cover is present, remove before use.

Stationary

blade

Cut height

adjustment

knob

Drive

chain*

Drive

system

cover

Small drive

sprocket*

Large drive

sprocket*

Lifting

handle

Cut height

adjustment

cover

Rear wheels (2)

Grass

discharge

chute

InertiaDrive

™

reel

Front fork

assembly

Cutting reel

blades (5)

Drive

system

lubrication

hole

Front wheels (2)

Ergo

grip

Handle

Handle shroud

Handle bolts (4),

Handle nuts (4),

Handle washers (8) and

Handle bushings (4)

Handle-

mount pegs

(2)

Rear wheel

bearings

(2)

Cutting reel

bearings*

(2)

Side

plates (2)

Torsion

spring

Locking bolts

(2 per side)

Adjustment

dials (2)

Rear axle

Cotter

pins (2)

Handle

height

adjustment

holes

Front fork assembly

bearings (2)

Reel

carriers (2)

*Located under cover (not visible)

StaySharp

™

Cutting System, Fiskars Exclusive

What is it? Fiskars’ exclusive StaySharp

™

Cutting System uses precision-

ground, hardened steel blades engineered to efﬁciently cut grass without

actually touching, greatly reducing friction and blade wear.

How is it different? Standard reel mowers rely on contact between the cutting

reel and stationary blade for cutting. This steel-on-steel contact creates friction

and causes blade wear. As a result, the blades on standard reel mowers dull

quickly and require costly annual sharpening to maintain peak performance.

Why is it important? Since the StaySharp

™

Cutting System cuts grass

without the blades touching, friction and blade wear are greatly reduced.

As a result, long-lasting performance is maintained without the cost and

inconvenience of annual blade sharpening.

InertiaDrive

™

Reel, Patent Pending

What is it? Fiskars’ patent-pending InertiaDrive

™

Reel combines a large-

diameter cutting reel and thick blades to store energy (like a ﬂywheel) until a

burst of extra cutting power is needed.

How is it different? Standard reel mowers use small-diameter cutting reels

with thin blades. These reels and mowers lack cutting power and frequently

jam when cutting small twigs, weeds or dense grass. When this happens

the cutting reel seizes, completely stopping the mower. The obstruction

must be removed before mowing can resume.

Why is it important? InertiaDrive

™

Reel uses the mower’s large-diameter

cutting reel and heavy blades to store energy (like a ﬂywheel) until a burst

of extra cutting power is needed. When a tough spot is encountered, the

InertiaDrive

™

Reel delivers twice the energy to power through without

jamming — providing a superior cut without interruption.

VersaCut

™

Technology, Patent Pending

What is it? Fiskars’ patent-pending VersaCut

™

Technology uses a unique

front-wheel cut height adjustment to lift the entire cutting system and maintain

superior blade positioning to provide maximum cutting versatility for all types

of grass and mowing habits.

How is it different? Standard reel mowers use a rear-wheel cut height

adjustment that relies solely on bed knife rotation around the reel. This severely

limits both the maximum cut height and range of cut height and, as a result,

limits the types of grass that can be cut.

Why is it important? VersaCut

™

Technology provides the greatest cut range

of any reel mower with 1" to 4" cut height settings. The 4" maximum cut height

is vital when a week of mowing is missed. Moreover, VersaCut

™

Technology’s

superior blade positioning and the extra cutting power of InertiaDrive

™

Reel

combine to effectively cut both cool and warm season grasses, including

tough southern varieties. VersaCut

™

Technology also enables one-touch

height adjustment for easier, more comfortable use.

Inset Wheel Design, Fiskars Exclusive

What is it? Fiskars’ Inset Wheel Design incorporates chain drive to allow

the cutting blades to be positioned in front of the drive wheels and extend

across the full width of the mower.

How is it different? Standard reel mowers use gears to transfer rotation

from the drive wheels to the cutting reel. This requires the cutting blades to

be inside the drive wheels, rather than extended across the full width of the

mower. Consequently, standard reel mowers cannot cut across their entire

width, making close edging impossible and leaving 3" wide uncut strips

under each wheel.

Why is it important? Since the Inset Wheel design allows the cutting

blades to extend across the full width of the mower, there are no uncut

strips under the wheels. It also allows the mower to edge closer than any

other reel mower.

StaySharp

™

Max Technologies

60% Easier to Push Most reel mowers can be difﬁcult to push —

especially in longer grass. The advanced technologies combine to

reduce push force by 60%.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fiskars StaySharp Max - 6201 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info