NOTE. You can expand the bag by holding the top and below part by each of your 2 hands and pull
it outwards so it will double it’s capacity when needed of for higher products to sanitize.
2.Close the bag with the zipper again and connect the zipper to the internal Hall-switch as indicated
in the illustration.
3.Press the power ON/OFF button 1x to start sterilization process.
4. The BLUE LED indicator is flickering and sterilization lasts for 30 seconds, when the led is OFF
then flip your item(s) over and repeat the process again. When this is done, take out the item(s),
close the bag with the zipper and clean your hands with water and soap or any other disinfectant
cleaner when ready. The process is completed.
NOTE: If the zipper is not placed to the internal hall switch magnet of the bag itself the sterilizer
will not work for your safety! Please place it properly till you feel it will fix firmly to the internal
magnet so the power ON/OFF button can be work as described.
Working Principle from the sterilizer:
UV-C and UV-A is a short wavelength light invisible to the human eye and kills these germs by
disrupting their DNA so they can't function or reproduce again/anymore. The UV-C sanitizer
maximizes sanitization effectiveness between light dispersion angle and UV-C intensity to ensure
optimal ultraviolet light exposure across both sides of your device.
Indicator Status light:
SN
①
②
③
④
Product Status:
⚫ Sterilizer process working
⚫ •Low battery
⚫ •Hall-switch not properly connected
