Bedienungsanleitung Flir One (Seite 11 von 11) (Englisch)

677804

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

USER GUIDE 11

LEGAL DISCLAIMER

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to

operate this equipment.

IC Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

VCCI

Product and safety information

Battery and charger information

This device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage

the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Use and standby times are

estimates only. Actual times are aected by, for example, device settings, features being used, battery condition, and temperature.

If the battery has not been used for a long time, to begin charging, you may need to connect the charger, then disconnect and reconnect it.

If the battery is completely discharged, it may take several minutes before the charging indicator is displayed. When your charger is not in use,

unplug it from the electrical plug and the device. Do not leave a fully charged battery connected to a charger, as overcharging may shorten

the battery’s lifetime. If left unused, a fully charged battery will lose its charge over time.

Always keep the battery between 15°C and 25°C (59°F and 77°F).

Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily.

Do not dispose of batteries in a re as they may explode. Dispose of batteries according to local regulations. Recycle when possible. Do not

dispose as household waste.

Use the charger for its intended purpose only. Improper use or use of unapproved chargers may present a risk of re, explosion, or other

hazard, and may invalidate any approval or warranty. If you believe the charger is damaged, take it to a service centre for inspection before

continuing to use it. Never use a damaged charger. Only use the charger indoors.

Take care of your device

Handle your device, charger and accessories with care. The following suggestions help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your

device gets wet, allow the device to dry.

• Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged.

• Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside the device and

damage electronic circuits.

• Do not attempt to open the device.

• Unauthorized modications may damage the device and violate regulations governing radio devices.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and mechanics. • Use a soft, clean, dry cloth to

clean the surface of the device

Recycle

Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent

uncontrolled waste disposal and promote the recycling of materials. Check how to recycle your FLIR ONE products at www.ir.com/irone/.

The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products,

batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies in the European

Union. Do not dispose of these products as unsorted municipal waste.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flir One Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Flir One

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info