542111
64
Zoom out
Zoom in
Vorherige Seite
1/67
Nächste Seite
64
Problem: The console / display will not turn on.
Solution: -Check if the treadmill is pugged into a grounded outlet.
- Check if the 0 / I switch is on (I) . The switch is near the power cord on the
back of the motor cover.
- Check the fuse near the switch. If the fuse is broken, please contact your
dealer.
Problem: Segments of the display don’t light up.
Solution: LEDs of the display are damaged; please contact your dealer.
Problem: display shows “- - “.
Solution: The safety key is missing. Place the key in the designated place to use the
treadmill.
Problem: The treadmill is running rough.
Solution: There is not enough lubricant between the belt and the running deck.
The treadmill should be lubricated at regular intervals.
Problem: The running belt slips on the rollers.
Solution: The belt needs to be tensioned. How to tensioning the belt is described in
chapter 4.2.
Problem: When touching metal parts of the treadmill static electricity is released.
Solution: - The treadmill should be powered by an grounded outlet.
- The running surface needs to be lubricated. Friction is created between the
belt and running board. This causes static energy and can be prevented by
regular lubrication.
Problem: The display shows error code E1.
Solution: An abnormal value is send to speed sensor. Perform the following steps:
1. Remove power from the treadmill (by unplugging the product from the
outlet), wait 10 seconds before turning on the power again.
2. Press START/STOP and check the following:
a. Does the belt starts to move?
b. If the belt is moving, is the error code E1 still in the display?
3. If the treadmill is running correctly, tension the belt again and lubricate the
running surface (chapter 4.4 of this manual)
If the belt is not rotating or error code E1 is still visible, please contact your
dealer.
5.3 Troubleshooting
5. General information
64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Flow Fitness RUNNER DTM600 Loopband wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info