Bedienungsanleitung Fluke PRV240 (Seite 1 von 1) (Englisch)

764226

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

PRV240

Proving Unit

Instruction Sheet

Introduction

The PRV240 Proving Unit (the Product) is an

electronic voltage source. This Product provides

a safe, risk free, and easy method to verify proper

operation of a test tool. Use it to verify either an

energized source or a de-energized source. Also

use it in cases where no known voltage source is

available to verify a test tool.

The Product does not require personal protective

equipment (PPE) unless your environment

requires minimal PPE such as a hard hat, safety

glasses, or ear plugs.

How to Contact Fluke

To contact Fluke, call one of the following

telephone numbers:

●Technical Support USA: 1-800-44-FLUKE

(1-800-443-5853)

●Calibration/Repair USA: 1-888-99-FLUKE

(1-888-993-5853)

●Canada: 1-800-36-FLUKE (1-800-363-5853)

●Europe: +31 402-675-200

●Japan: +81-3-6714-3114

●Singapore: +65-6799-5566

●Anywhere in the world: +1-425-446-5500

Or, visit Fluke's website at www.uke.com.

To register your product, visit

http://register.uke.com.

To view, print, or download the latest manual

supplement, visit

http://us.uke.com/usen/support/manuals.

Safety

A Warning identies conditions and procedures

that are dangerous to the user.

 Warning

To prevent possible electrical shock, re,

or personal injury:

●Read all safety information before you

use the Product.

●Carefully read all instructions.

●Do not alter the Product and use only as

specied, or the protection supplied by

the Product can be compromised.

●Do not touch voltages >30 V ac rms,

42 V ac peak, or 60 V dc.

●Do not use the Product around

explosive gas, vapor, or in damp or wet

environments.

●Do not use the Product if it operates

incorrectly.

PN 4571866 November 2014, Rev. 1, 11/16

Product specications are subject to change without notice.

●Examine the case before you use the

Product. Look for cracks or missing

plastic. Carefully look at the insulation

around the terminals.

●Do not use the Product if it is altered or

damaged.

●Remove the batteries if the Product is

not used for an extended period of time,

or if stored in temperatures above 50 °C.

If the batteries are not removed, battery

leakage can damage the Product.

●You must close and lock the battery

door before you operate the Product.

●Replace the batteries when the low

battery indicator shows to prevent

incorrect measurements.

Symbols

Symbols used in the instructions or on the Product

are shown in Table 1.

Table 1. Symbols

Symbol Denition

Risk of danger. Important information.

See manual.

Hazardous voltage.

Battery

Certied by CSA Group to North

American safety standards.

Conforms to relevant Australian EMC

standards.

Conforms to European Union directives.

Conforms to relevant South Korean EMC

Standards.



This product complies with the WEEE

Directive marking requirements. The

afxed label indicates that you must

not discard this electrical/electronic

product in domestic household waste.

Product Category: With reference to

the equipment types in the WEEE

Directive Annex I, this product is classed

as category 9 "Monitoring and Control

Instrumentation" product. Do not dispose

of this product as unsorted municipal

waste.

Operation

Table 2 shows the locations for the controls and

interface of the Product.

Use the Product to verify operation of a test tool at

240 V ac or 240 V dc.

To use:

1. Select the AC or DC function with the

selection switch on the side.

2. Place the red probe of the test tool into the (+)

terminal and press down rmly.

3. Place the black probe of the test tool into the

(-) terminal and press down rmly.

4. Make sure the meter reading of the Product is

valid for the test function.

For low impedance test tools, the output voltage

should be sourced at >50 V ac or dc. It is

recommended to test both the ac and dc functions

of the test tool.

Table 2. Overview of PRV240

SOURCE ONLY

hvj02.eps

Item Description

Voltage selection

+ Terminal

− Terminal

Power indicator

Battery Installation/Replacement

 Warning

To prevent possible electrical shock, re,

or personal injury:

●Do not operate the Product with covers

removed or the case open. Hazardous

voltage exposure is possible.

●Repair the Product before use if the

battery leaks.

●Have an approved technician repair the

Product.

To install or replace the batteries:

1. Turn the battery-door latch until the unlock

symbol aligns with the arrow.

2. Lift off the battery door.

3. Insert or replace the four AA batteries. Use

the correct battery orientation.

4. Install the battery door.

5. Turn the battery-door latch until the locked

symbol aligns with the arrow.

Specications

Output voltage

240 V ac rms or dc ........... ±10 % ≥1 MΩ

LoZ >3 kΩ load ................ 60 V ac typical

50 V ac rms minimum

Output loading ......................See Figure 1

LED power indicator ......... Turns on when output voltage is

present

Battery ................................... 4 x AA Alkaline batteries NEDA 24 A

IEC LR03

Battery life .............................5000 (5-second duration) test cycles

with >1 MΩ load, 300 tests minimum

with >3 kΩ load

Operating temperature ..... -10 °C to +50 °C

Operating humidity ........... 0 % to 90 % (0 °C to 35 °C)

0 % to 70 % (35 °C to 55 °C)

Operating altitude ............. 2000 m

Dimensions ....................... 11.7 cm x 7.4 cm x 2.8 cm

(4.6 in x 2.9 in x 1.1 in)

Weight ................................ 0.23 kg (8 oz) includes batteries

Safety ................................. IEC61010-1, IEC61010-2-030

Electromagnetic Compatibility (EMC)

International ..........................IEC 61326-1: Controlled

Electromagnetic Environment

CISPR 11: Group 1, Class A

Group 1: Equipment has intentionally generated and/or uses

conductively-coupled radio frequency energy that is necessary

for the internal function of the equipment itself.

Class A: Equipment is suitable for use in all establishments

other than domestic and those directly connected to a low-

voltage power supply network that supplies buildings used

for domestic purposes. There may be potential difculties in

ensuring electromagnetic compatibility in other environments

due to conducted and radiated disturbances.

Caution: This equipment is not intended for use in residential

environments and may not provide adequate protection to

radio reception in such environments.

Emissions that exceed the levels required by CISPR 11 can

occur when the equipment is connected to a test object.

Korea (KCC) ...........................Class A Equipment (Industrial

Broadcasting & Communication

Equipment)

Class A: Equipment meets requirements for industrial

electromagnetic wave equipment and the seller or user

should take notice of it. This equipment is intended for use in

business environments and not to be used in homes.

USA (FCC) ..............................47 CFR 15 subpart B. This product

is considered an exempt device per

clause 15.103.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material

and workmanship for one year from the date of purchase.

This warranty does not cover fuses, disposable batteries,

or damage from accident, neglect, misuse, alteration,

contamination, or abnormal conditions of operation or

handling. Resellers are not authorized to extend any other

warranty on Fluke’s behalf. To obtain service during the

warranty period, contact your nearest Fluke authorized service

center to obtain return authorization information, then send

the product to that Service Center with a description of the

problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER

WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR

PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT

LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM

ANY CAUSE OR THEORY. Since some states or countries

do not allow the exclusion or limitation of an implied warranty

or of incidental or consequential damages, this limitation of

liability may not apply to you.

Fluke Corporation Fluke Europe B.V.

P.O. Box 9090 P.O. Box 1186

Everett, WA 98206-9090 5602 BD Eindhoven

U.S.A. The Netherlands

11/99

Fluke Corporation certies this Product was tested and

veried with applicable calibration procedures during the

manufacturing process. Fluke’s quality system controls these

procedures.

The instruments used during the testing and calibration of

this Product are traceable to SI units through internationally

recognized measurement standards.

This document is not a certicate of calibration or traceability.

To obtain a certicate of calibration contact the nearest

Fluke service center to process an order to have your

Product returned for calibration. A nominal fee is charged for

calibration service.

100

150

200

250

300

1 K 10 K 100 K1 M 10

2 K

V ac

Load Resistance

Figure 1.

Fluke PRV240 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fluke PRV240

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info