Bedienungsanleitung Flymo EasiCut 460 (Seite 8 von 104) (Alle Sprachen)

662907

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

SAFETY PRECAUTIONS

Service

Have your power tool serviced by a qualified

repair person using only identical replacement

parts.

This will ensure that the safety of the

power tool is maintained.

Hedge trimmer safety warnings:

•

Keep all parts of the body away from the cutter blade.

Do not remove cut material or hold material to be cut

when blades are moving. Make sure the switch is off

when clearing jammed material.

moment of

inattention while operating the hedge trimmer may

result in serious personal injury.

•

Carry the hedge trimmer by the handle with the cutter

blade stopped. When transporting or storing the

hedge trimmer always fit the cutting device cover.

roper handling of the hedge trimmer will reduce

possible personal injury from the cutter blades.

•

Hold the power tool by insulated gripping surfaces

only, because the cutter blade may contact hidden

wiring or its own cord.

Cutter blades contacting a

live" wire may make exposed metal parts of the

ower tool "live" and could give the operator an

electric shock.

•

Keep cable away from the cutting area.

uring

operation the cable may be hidden in shrubs and can

be accidentally cut by the blade.

Additional Safety Recommendations

Work area safety

1. Never allow children or people unfamiliar with these

instructions to use the product. Local regulations may

restrict the age of the operator.

2. Only use the product in the manner and for the

functions described in these instructions.

3. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Electrical safety

1. The British Standards Institute recommend the use of

a Residual Current Device (R.C.D.) with a tripping

current of not more than 30mA. Even with a R.C.D.

installed 100% safety cannot be guaranteed and safe

working practice must be followed at all times. Check

your R.C.D. every time you use it.

2. Before use, examine the cable for signs of damage or

ageing. If the cable is found to be defective, take the

product to an Authorised Service Centre and have the

cable replaced.

3. Do not use the product if the electric cables are

damaged or worn.

4. Immediately disconnect from the mains electricity

supply if the cable is cut, or the insulation is damaged.

Do not touch the electric cable until the electrical

supply has been disconnected. Do not repair a cut or

damaged cable, replace it with a new one. If

replacement of the cable is necessary, this must only

be done by an Approved Service Centre in order to

avoid a safety hazard.

5. Your electric cable must be untangled, tangled cables

can overheat and reduce the efficiency of your

product

6. Always switch off at the mains before disconnecting

any plug, cable connector or extension cable.

7. Switch off, remove plug from mains and examine

electric supply cable for damage or ageing

before

winding cable for storage.

8. Always wind cable carefully, avoiding kinking.

9. Use only on AC mains supply voltage shown on the

product rating label.

10.Our products are double insulated to EN60745.

Under no circumstances should an earth be

connected to any part of the product.

Cables

If you want to use an extension cable when operating

your product, only the following cable dimentions should

be used.

- 1.0 mm

: max length 40 m

- 1.5 mm

: max length 60 m

- 2.5 mm

: max length 100 m

Minimum rating:

1.00mm

size cable 10 amps 250 volts AC

1. Mains cables and extensions are available from your

ocal Approved Service Centre.

2. Only use extension cables specifically designed for

outdoor use and which conform to one of the

following specifications: Ordinary rubber (60245 IEC

53), Ordinary PVC (60227 IEC 53) or Ordinary PCP

(60245 IEC 57)

. If the short connection lead is damaged, it must be

replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

Personal safety

1. Always wear suitable clothing, gloves, and stout

hoes.

. Thoroughly inspect the area where the product is to

be used and remove all wires and other foreign

objects.

3. Before using the machine and after any impact, check

for signs of wear or damage and repair as necessary.

4. Always ensure the hand guard supplied is fitted

before using the hedge trimmer. Never attempt to use

an incomplete product or one with an unauthorised

modification.

Power tool use and care

1. Know how to stop the product quickly in an

emergency.

2. Never hold the product by the guard.

3. Never operate the product with damaged guards or

without guards in place.

4. Do not use stepladders whilst operating the product.

5. Remove the plug from the mains :-

- before leaving the product unattended for any period;

- before clearing a blockage;

- before checking, cleaning or working on the

appliance;

- if you hit an object. Do not use your product until you

are sure that the entire product is in a safe operating

condition;

- if the product starts to vibrate abnormally. Check

immediately. Excessive vibration can cause injury.

- before passing to another person.

Maintenance and storage

1. Keep all nuts, bolts and screws secure to be sure the

hedge trimmer is in safe working condition.

2. Replace worn or damaged parts for safety.

3. Be careful during adjustment of the product to prevent

entrapment of the fingers between moving blades and

fixed parts of the machine.

Store in a cool dry place and out of reach of

children. Do not store outdoors.

5. Allow the product to cool for at least 30 minutes

before storing.

ENGLISH - 2

Flymo EasiCut 460 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info