Bedienungsanleitung Flymo EasiCut Cordless 500 (Seite 9 von 103) (Alle Sprachen)

662906

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

GUARANTEE AND GUARANTEE POLICy

If any part is found to be defective due to faulty

manufacture the guarantee period, Husqvarna UK Ltd.,

through its Authorised Service Repairers will effect the

repair or replacement to the customer free of charge

providing:

(a)The fault is reported directly to the Authorised

Repairer.

(b)Proof of purchase is provided.

(c)The fault is not caused by misuse, neglect or faulty

adjustment by the user.

(d)The failure has not occurred through fair wear and

tear.

(e)The machine has not been serviced or repaired, taken

apart or tampered with by any person not authorised

by Husqvarna UK Ltd.

(f) The machine has not been used for hire.

(g)The machine is owned by the original purchaser.

(h)The machine has not been used commercially.

* This guarantee is additional to, and in no way

diminishes the customers statutory rights.

Failures due to the following are not covered, therefore it

is important that you read the instructions contained in

this Operator's Manual and understand how to operate

and maintain your machine:

Failures not covered by guarantee

* Failures as a result of not reporting an initial fault.

* Failures as a result of sudden impact.

* Failures as a result of not using the product in

accordance with the instructions and recommendations

contained in this Operator's Manual.

* Machines used for hire are not covered by this

guarantee.

* The following items listed are considered as wearing

parts and their life is dependent on regular

maintenance and are, therefore not normally subject to

a valid warranty claim: Blades.

Caution!

Husqvarna UK Ltd. does not accept liability

under the warranty for defects caused in whole or part,

directly or indirectly by the fitting of replacement parts

or additional parts that are not either manufactured or

approved by Husqvarna UK Ltd., or by the machine

having been modified in any way

ENGLISH - 3

Environmental Information

• Awareness of the environment must be considered

when disposing of ‘end-of-life’ product.

• If necessary, contact your local authority for disposal

information.

BATTERy DISPOSAL

•

This product contains a NiMH battery and should not

be discarded with normal household waste at the end

of its life.

• The battery must be removed from the product before

disposal.

• The battery should be disposed of safely.

• Do NOT dispose of used battery with household

waste.

• Do NOT dispose of battery to water.

• NiMH batteries can be harmful and should be

disposed of through the recognised recycling facility in

accordance with European Regulations.

• Do NOT incinerate.

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product. For more

detailed information about recycling of this product,

please contact your local council office, your household

waste disposal service or the shop where you purchased

the product.

Service Recomendations

• your product is uniquely identified by a silver and black product rating label.

•

We strongly recommend that your product is serviced at least every twelve months, more often in a professional

pplication.

Charging the Battery

Initial Charging Procedure

1. Use the charger indoors only.

2. Ensure the charger is not exposed to moisture. Keep

the charger and the Battery Pack dry at all times.

eep the charger well ventilated during charging.

3. Attach the charger connector

(C1)

to the Battery Pack.

4. Plug the charger

(C2)

into a suitable household

electrical wall socket and switch on.

5. The red indicator lamp

(C3)

glows continuously during

harging.

. Full charge will be achieved in 5-6 hours. During

charging the charger becomes warm. This is normal

and means the charger is operating correctly.

Re-Charging the Battery Pack

1. Re-charge the Battery Pack as soon as the cutting

power of your Hedgetrimmer begins to die and slow

down.

. Avoid running the Battery Pack into "deep" discharge,

i.e. avoid flattening the Battery Pack completely.

3. Follow the procedure outlined in the

Initial Charging

Procedure.

4. Charging the Battery Pack according to these

nstructions should ensure maximum battery life.

Battery Pack Assembly (D)

1. Attach the Battery Pack as illustrated in

Figure D

ensuring that it clicks into position and is located

irmly.

2. To remove, press the two buttons

(D1)

on either side

f the Battery Pack and slide off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flymo EasiCut Cordless 500 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info