Bedienungsanleitung FoodSaver GameSaver Silver (Seite 4 von 10) (Englisch)

610574

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

5 6

www.foodsaver.com 1-877-777-8042 www.foodsaver.com 1-877-777-8042

FEATURES HOW TO

HOW TO

1. Make sure vehicle has a 10 amp rated fuse or

higher. Refer to your vehicle’s owners manual.

2. Plug 12 Volt DC adaptor into the appliance first.

3. Plug 12 Volt DC adaptor into the 12V power outlet.

4. When appliance is powered by 12 Volt DC, unit

will take slightly longer to vacuum and seal than

using standard 120 volt AC power.

5. Unit should be placed on flat surface and have

enough room that the bag and its contents have

surface support.

6. When appliance is powered by 12 Volt DC, make

sure vehicle is running and all electrical items

in vehicle are off (air conditioning, lights, radio,

etc.).

Note: Do not plug unit into 12 Volt DC and 120

Volt wall outlet at the same time. Do not use any

external supply not supplied with this appliance.

If green light on 12 Volt DC Adapter is not on, check

the fuse on the Appliance Adapter and in Vehicle

Warning: Do not use the 12 Volt DC Adapter with

the vehicle running in an enclosed space.

Warning: Use only Vehicle Adaptor KD-627 (E305658).

12 Volt Important Instructions

1. Prepare container according to FoodSaver

Accessory Guidelines .

2. Insert one end of Accessory Hose into Accessory

Port on appliance. Insert other end into port on

accessory. Twist tab on Accessory Hose while

inserting to ensure a tight fit.

3. Press Vac/Seal Button.

4. When motor and Indicator Light turn off, vacuum

process is complete. Note that the appliance

will still go through sealing cycle even when

vacuuming an accessory. You will hear Motor

shut off and then the sealing cycle will begin.

5. Gently twist and remove Accessory Hose from

accessory and appliance.

6. To test vacuum, simply tug on accessory lid. It

should not move.

Note: For important tips on using accessories with

different foods, please refer to the FoodSaver

Reference Guide.

How to

Vacuum Package with FoodSaver

Accessories

FoodSaver Vacuum Packaging Canisters (without

large knob on lid)

To release vacuum and open, push gray rubber

button on lid.

FoodSaver Bulk Canisters and Quick Marinators

(with large knob on lid) and Universal Lids.

To release vacuum and open, turn knob on lid to

Open.

FoodSaver Jar Sealer with Mason Jars

For use with Ball

and Kerr

brand Mason jars.

Important: Do NOT use screw bands when vacuum

packaging jars. To open, wedge spoon between

Mason jar lid and highest part of threaded rim.

Twist spoon gently to release vacuum.

FoodSaver Bottle Stoppers

To release vacuum and open, twist and pull up

on Bottle Stopper.

How to

Open FoodSaver

Accessories after Vacuum Packaging

If you want to seal a bag without vacuuming, use

the Seal Button on the Control Panel. You can even

reseal bags such as Mylar

potato chip bags.

1. Place open end of bag on Sealing Strip, close lid

and use latch to lock.

2. Press Seal Button on Control Panel .

3. When Motor and Red Indicator Light turn off,

unlock latch, open lid and remove bag.

Note: As long as you place open end of bag on

Sealing Strip (not in Vacuum Channel), no air will

be removed.

How to

Seal Only

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

FoodSaver GameSaver Silver Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info