Bedienungsanleitung Foppapedretti My little love (Seite 3 von 16) (Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

769005

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

• Check the box contents.

• To avoid damaging the cot during

assembly, please remove all the

packaging materials on a clean, at

surface.

• ATTENTION! Assembly must be

performed by an adult only.

• IMPORTANT: To assemble the cot

correctly, carry out the assembly

operations in the indicated order.

Incorrect assembly operations could

make the cot unsafe.

• WARNING: Be aware of the risk of open

re and other sources of strong heat,

such as electric bar res, gas res, etc.

in the near vicinity of the cot.

• WARNING! Do not use the cot if any

part is broken, torn or missing and

use only spare parts approved by the

manufacturer.

• WARNING! Do not leave anything in the

cot or place the cot close to another

product, which could provide a foothold

or present a danger of suffocation

or strangulation, e.g. strings, blind/

curtain cords, etc..

• WARNING! Do not place more than one

mattress in the cot.

• The product is ready for use only when

all locking mechanisms are engaged.

Make sure they are securely engaged

before use.

• Remove the holder when the cot base is

in the lowest position.

• The lowest position is the safest and

that the base should always be used in

that position as soon as the baby is old

enough to sit up.

• If you leave the child unattended in the

cot, always make sure that the movable

side is closed.

• Important when choosing cot mattress;

There has to be at least a 500 mm

distance between the upper surface of

the mattress and the upper border of

the bed sides (highest position in case

of adjustable bedside heights) when the

cot base is xed in its lowest position.

There has to be at least a 200 mm

distance between the upper surface of

the mattress and the upper border of

the bed sides (highest position in case

of adjustable bedside heights) when the

cot base is xed in its highest position.

• This cot requires a 124x63 cm mattress.

Maximum mattress thickness: 12 cm.

• The dimension shall take into account

that there shall be no gap more than

30 mm between the mattress and the

sides end ends in any position of the

mattress.

• Periodically check that the screws are

tightened correctly.

• Should any screws be loose, tighten

them to avoid the risk that any object

(necklaces, clothes, etc.) could

remain entangled and pose a risk of

strangulation.

• In order to prevent falls, when baby can

climb out of the cot, stop using the cot

itself.

• Use only spare parts supplied or

authorized by the manufacturer.

• Correct use and maintenance will make

the cot durable and safe over time.

• Clean with a damp cloth or neutral

detergent (NO SOLVENTS) and allow to

dry in the air.

Avvertenze • Warning • Avvertissement • Advertências • Advertencias • Προειδοποιήσεις

EN_IMPORTANT, RETAIN FOR FUTURE

REFERNCE: READ CAREFULLY.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Foppapedretti My little love Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info