Bedienungsanleitung Ford Galaxy - feb 2011 - okt 2011 (Seite 7 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

531193

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

Features

This appliance includes some or all of the following features.

1. Hose

2. Container handle

3. Filter cleaning switch

4. On/off switch

5. Handle

6. Cord rewind button

7. Suction head

8. Wheels

9. Container

10. Extension tube

11. Airflow control switch

In addition, this appliance is supplied with some or all of the

following accessories (fig. A):

12. Crevice tool

13. Brush tool

14. Parquet floor head (VN2010 / VN2200)

15. Turbo brush (VN2200)

The parquet floor head is not included with all models. This

accessory is available from your Black & Decker dealer /

service centre (cat. no. WV100).

The turbo brush is not included with all models. This

accessory is available from your Black & Decker dealer /

service centre (Cat. No. WV200).

Assembly

Connecting the hose (fig. A)

X Insert the hose connector (16) into the inlet (17) of the

appliance.

X Line up the hose connector tabs with the slots in the inlet.

X Slide the hose further until the release buttons (18) (2

positions) click into place.

X To disconnect the hose, press the release buttons (18) (2

positions) and pull out the hose.

Mounting the extension tube (fig. A)

X Press the lock button (19) and slide the hose nozzle (20) into

the tube (10) until it clicks into place.

X To remove the tube (10), press the lock button and pull the

hose nozzle (20) out of the tube.

Mounting the suction head (fig. A)

The suction head (7) allows for vacuuming on carpet and

hard surfaces (e.g. laminate and tiles).

X Press the lock button (21) and slide the tube (10) into the

head (7) until it clicks into place.

X To remove the head (7), press the lock button (21) and pull

the tube (10) out of the head (7).

VN2010/VN2200 - Mounting the parquet floor head (fig. A)

The parquet floor head (14) allows for vacuuming on wooden

and polished surfaces.

X Press the lock button (21) and slide the tube (10) into the

head (14) until it clicks into place.

X To remove the head (14), press the lock button (21) and pull

the tube (10) out of the head.

VN2200 - Mounting the turbo brush (fig. A)

The turbo brush (15) allows for vacuuming on cut pile

carpeting.

The brush is particularly useful for picking up hair, threads,

etc., as well as for refreshing trodden-down carpet pile.

X Press the lock button (21) and slide the tube (10) into the

head (15) until it clicks into place.

X To remove the head (15), press the lock (21) button and pull

the tube (10) out of the head.

Mounting accessories (fig. A)

The crevice tool (12) allows for vacuuming in narrow and

hard to-reach places. The brush tool (13) allows for

vacuuming on furniture, blinds, curtains, windows and stairs.

The accessories can be mounted on both the hose (1) and the

tube (10).

X Press the lock button (19 or 21) and slide the accessory onto

the hose nozzle (20) or the tube (10).

X To remove an accessory, press the lock button (19 or 21)

and pull the accessory off.

When not in use, the accessories can be stored on the

accessory holder (22). The accessory holder is stored on the

hose nozzle. This is clipped into place, to remove pull way

from the hose nozzle. The tools are stored as shown in fig. A.

Use

Unwinding and rewinding the cord

The cord rewind button (6) can be operated by hand or foot.

X Before use, pull a sufficient length of cord from the back of

the appliance.

X After use, press the cord rewind button (6) to store the cord

back into place. Manually guide the cord to ensure it does

not swing back. Ensure the plug is correctly located.

Adjusting the length of the tube (fig. B)

The extension tube (10) is made up of three pieces.

X To extend the middle / lower two pieces, press the lower

adjustment button (23) and slide out the tube fully until it

clicks into place.

X The upper two pieces can be adjusted in 11 steps. Press the

upper adjustment button knob (24) and slide the tube to the

desired length. Make sure that the tube clicks into place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ford Galaxy - feb 2011 - okt 2011 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ford Galaxy - feb 2011 - okt 2011

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info