Bedienungsanleitung Frico IHPA (Seite 2 von 5) (Englisch)

787207

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Infrapalm IHPA

Dear Customer, please read the following

information carefully before using the

appliance for the ﬁrst time for your own

safety and to ensure correct use.

Safety information

These instructions belong to the appliance

and must be kept in a safe place. If changing

owners, they should be surrendered to the

new owner.

• The appliance should be used only in the

way described in this instruction manual

and may be used outside, even in wet

conditions.

• The appliance is not intended for use in

animal farming and rearing.

• Do not use the appliance in ﬂammable and

combustible atmospheres.

• Connect the appliance only to an

alternating current. Voltage as speciﬁed on

the rating plate.

• The appliance should be connected to

the mains by a qualiﬁed electrician and

according to current and local electrical

regulations.

• The manufacturer has provided an

appropriate supply cable with this

appliance.

• When installing, ensure it is suitably

connected to a power point that can be

disconnected on all poles.

• The supply cable should be laid out in

such a way to prevent it being damaged or

tripped over.

• In case the cable is damaged during

operation the unit should be disconnected

from the power and a qualiﬁed electrician

called to make the necessary repairs.

• The guarantee and any liability of the

producer will be invalid in case of damage

caused by improper use, improper

assembly or lack of compliance with safety

regulations.

• If the appliance is installed in an area

where there is a risk of high winds, public

events, children playing etc., the base of the

appliance must be anchored to the ground

with screws or bolts - ø 8x120.

• After initially switching on the appliance or

following periods of non use, there may be a

burning smell.

• Never touch the heater elements during

operation or for at least 20 minutes after

switching off.

Cleaning

Disconnect the equipment from the power

supply system before cleaning any part of this

apparatus.

• Do not use abrasive or caustic cleaning

agents.

• Clean with soft, moistened lint.

• Do not touch the heater lamps with bare

ﬁngers since the deposited grease can cause

premature failure.

• If it happens, clean the quartz with a soft

cloth moistened with alcohol. Do not use

denatured or spirit salicylic.

After sales service

All repairs must be carried out by a person

having adequate knowledge and qualiﬁcations.

Any repairs carried out by unqualiﬁed

personnel may cause loss of warranty.

Unpacking the heater

Before unpacking please check that the

packaging has not been damaged during

transport. If so, check for any visible damage

and inform your supplier. After assembly, the

packaging should be removed according to

local regulations.

Note

Non-professional installation or repairs

constitutes danger for the users!

ASSEMBLY AND OPERATING INSTRUCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Frico IHPA Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Frico IHPA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info