Bedienungsanleitung Fujifilm Finepix F440 (Seite 48 von 51) (Englisch)

101529

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

9594

Troubleshooting

eIf you think the camera is faulty, check the following once more.

Frame erase does not

erase the frame.

The ERASE ALL

function does not erase

all the frames.

Screens are not

displayed in English.

There is no image or

sound on the TV.

The TV image is black

and white.

When the camera is

connected to a PC, the

photographed image or

playback image appears on

the camera’s LCD monitor.

Nothing happens when

I use the Mode switch.

The camera no longer

works correctly.

Can’t print with

PictBridge.

The camera was

connected to a PC

when the USB mode

was set to “

”.

Some frames may be protected.

A language other than English is selected

in the “ ” setting in the “SET-UP”

menu (➡P.61).

i The included A/V cable was connected

during movie playback.

The camera is not connected to the TV

correctly.

i “TV” is selected as the TV input.

i The video output setting is incorrect.

i The TV volume is turned down.

The video output setting is incorrect.

i The USB cable is not correctly

connected to the PC or camera.

i The PC is not turned on.

i Camera malfunction.

i The battery runs out.

The camera has suffered an unforeseen

problem.

“

” is not selected in USB mode in the

“SET-UP” menu.

Unprotect frames using the camera on

which the protection was first applied.

1Press the “MENU/OK” button to display

the menu.

2Press “d” or “c” to select “

F” and press

“a” or “b” to select “SET-UP”. (Press the

“MENU/OK” button to display the “SET-

UP” screen on the LCD monitor.)

3Press “d” or “c” to move to option 3 and

then press “a” or “b” to select “ ”.

4Press “d” or “c” several times to select

“ENGLISH”.

5Press the “MENU/OK” button.

i After the movie playback mode is stopped,

connect the camera and TV correctly.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.

Change the setting to “NTSC” or “PAL” (➡P.61).

i Adjust the volume.

Change the setting to “NTSC” or “PAL”

(➡P.61)

i Set up the camera and the USB cable

(included) correctly.

i Turn the PC on.

Briefly remove the battery or disconnect the

AC power adapter. Then reload the battery or

reconnect the AC power adapter and try again.

i Load a new or fully charged battery.

Briefly remove the battery or disconnect

the AC power adapter. Then reload the

battery or reconnect the AC power adapter

and try again.

If the message still appears,

contact your FUJIFILM dealer.

Select “

” in USB mode in the “SET-

UP” menu.

Perform steps

to remove the

camera from PC.

h Windows

The “New Hardware Found” wizard (or

“Scanner and Camera” wizard)

appears. If the wizard does not appear,

proceed to step

Click the [Cancel] button.

Disconnect the camera from the PC.

h Macintosh

The window for locating the driver

appears. If the window does not

appear, proceed to step

Click the [Cancel] button.

Disconnect the camera from the

Macintosh.

Troubleshooting Possible causes Solutions

Specifications

System

Model Digital camera FinePix F440

Effective pixels 4.1 million pixels

CCD sensor 1/2.5 inch square pixel CCD

Number of total pixels 4.23 million pixels

Storage media xD-Picture Card (16/32/64/128/256/512 MB)

File format Still image: JPEG (Exif ver. 2.2)

✽ Design rule for Camera File System compliant DPOF compatible

Movie: AVI format, Motion JPEG

Audio: WAVE format, Monaural sound

Number of recorded pixels Still image: 2304 × 1728 pixels/1600 × 1200 pixels/1280 × 960 pixels/

640 × 480 pixels (

)

Movie: 320 × 240 pixels (10 frames per second with monaural sound)

160 × 120 pixels (10 frames per second with monaural sound)

Lens Fujinon 3.4 × optical zoom lens

Aperture: F2.8 to F5.5

Focal length f=6.3 mm to 21.6 mm

(Equivalent to 38 mm to 130 mm on a 35 mm camera)

Focus TTL contrast-type, Auto focus

Focal range Normal: Approx. 60 cm (2.0 ft.) to infinity

Macro: Wide-angle: Approx. 9.0 cm (3.5 in.) to 80 cm (2.6 ft.)

Telephoto : Approx. 39 cm (1.3 ft.) to 80 cm (2.6 ft.)

Shutter speed 2 sec. to 1/2000 sec. (depend on Exposure mode)

Aperture F2.8 to F7.4 (automatically selected)

Sensitivity Photography mode (

a): AUTO (Equivalent to ISO 80-400, depending on

conditions)/80/100/200/400

Photography mode (s, m, ,, ., /): ISO 80/100/200/400

Photometry TTL 64-zones metering

Exposure control Program AE

Exposure compensation

–2.1 EV to +1.5 EV in 0.3 Steps EV increments (in Manual photography mode)

White balance Photography mode (a, m, ,, ., /): AUTO

Photography mode (s): 7 positions can be selected

Viewfinder Real image optical Approx. 78% coverage

LCD monitor 2.0-inche, 154,000 pixels low-temperature poly-silicon TFT, Approx. 97%

coverage

Flash type Auto flash

Effective range: Wide-angle: Approx. 0.6 m-3.6 m (2.0 ft.-12.0 ft.)

Telephoto: Approx. 0.6 m-2.0 m (2.0 ft.-6.7 ft.)

Macro: Approx. 0.3 m-0.8 m (1.0 ft.-2.6 ft.)

Flash modes: Auto, Red-Eye Reduction, Forced Flash, Suppressed Flash,

Slow Synchro, Red-Eye Reduction + Slow Synchro

Self-Timer 10 sec.

Video output NTSC/PAL selectable

Input/Output Terminals

External connection terminals

Special USB cable, special A/V cable, cradle connection

DC Input To connect the AC power Adapter AC-5VW

Fujifilm Finepix F440 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info