Bedienungsanleitung Fujifilm Instax Mini Link - Smartphone printer (Seite 13 von 14) (Englisch)

693468

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

WW_EN

Simple Printer Care

■ Printer Care

Do not open the film door until all film exposures have

been used, doing so will prematurely expose the remaining

film and render it unusable.

Your printer is a fragile object. Do not expose it to water, sand

or gritty materials.

Do not use solvent such as thinner or alcohol to remove dirt.

Keep the film chamber and printer interior clean to avoid

damaging films.

Do not leave your printer in direct sunlight or hot places such

as the inside of a car. Do not leave the printer in damp places

for prolonged periods.

Moth repellent gas such as naphthalene may affect your

printer and prints. Take care to keep your printer and prints in a

safe, dry place.

Note that the temperature range within which your printer can

operate is +5°C to +40°C.

Take great care to ensure that printed materials do not violate

do not offend public decency. Actions that violate the rights of

others, are contrary to public decency or constitute a nuisance

may be punishable by law or otherwise legally actionable.

This printer is designed for household use. It is not suitable for

commercial use.

■ Charging the Battery

The battery has not been charged during manufacture. Please

charge the battery fully before use.

Charge the battery using the supplied USB cable. Charging

times will increase at ambient temperatures below +10 °C or

above +35 °C. Do not attempt to charge the battery at

temperatures above +40 °C or at temperatures below +5 °C as

the battery will not charge.

■ Battery Life

At normal temperatures, the battery can be recharged about

300 times. A noticeable decrease in the length of time the

battery will hold a charge indicates that it has reached the end

of its service life.

■ Cautions: Handling the Battery

The battery and printer body may become warm to the touch

after extended use. This is normal.

■ Certification marks acquired by the printer are located inside

the film chamber�

■ Cautions During Printing

Do not shake the

printer while

printing.

Do not drop the

printer while

printing.

Do not cover the

film ejection slot

while printing.

■ “instax mini” Film and Print Care

See FUJIFILM Instant Film “instax mini” for film use instructions.

Follow all instructions for safe and proper use.

Keep the film in a cool place. Do not leave the film in a place

where the temperature is extremely high (e.g., in a closed car)

for many hours.

Do not puncture, tear, or cut “instax mini” film. If film becomes

damaged, do not use.

When you load a film pack, use the film as soon as possible.

If the film has been kept in a place where the temperature is

extremely high or low, bring it to room temperature before

starting to print pictures.

Be sure to use the film before the expiration or “Use Before” date.

Avoid airport checked luggage inspection and other strong

X-ray illumination. The effect of fogging, etc. may appear on

unused film. We recommend that you carry the printer and/or

the film onto the aircraft as carry-on luggage. (Check with each

airport for more information.)

Avoid strong light, and keep the developed prints in a cool and

dry place.

Do not puncture or cut this film as it contains a small amount

of caustic paste (high alkaline). Never let children or animals

put the film into their mouth. Also pay attention so that the

paste does not come into contact with skin or clothes.

Should the paste inside the film come into contact with skin or

clothes, immediately wash off with plenty of water. If the paste

comes into contact with the eyes or mouth, immediately wash

the area with plenty of water and contact a doctor. Note that

the alkaline inside the film remains active for about 10 minutes

after the picture has been printed.

■ Cautions on Handling the Film and Prints

For details, refer to the instructions and warnings on FUJIFILM

Instant Film “instax mini”.

Bluetooth® Devices: Cautions

IMPORTANT: Read the following notices before using the

product’s built-in Bluetooth transmitter�

■ Use only as part of a Bluetooth network�

FUJIFILM Corporation and its affiliates do not accept liability for

damages resulting from unauthorized use. Do not use in

applications requiring a high degree of reliability, for example in

medical devices or other systems that may directly or indirectly

impact human life. When using the device in computer and

other systems that demand a greater degree of reliability than

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Instax Mini Link - Smartphone printer Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm Instax Mini Link - Smartphone printer

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info