48583
28
Zoom out
Zoom in
Vorherige Seite
1/29
Nächste Seite
Color monitor 19T2
20 - English A26361-K616-Z100-2-5E19
Two fine horizontal lines (wires) are visible
i
Your monitor is equipped with a Trinitron picture tube, which enables more light to reach
the screen with a vertical slot mask, and therefore produces more intense colors. The
thin lines visible with a white background are shadows of the damper wires, which
stabilize the vertical slot mask. They are characteristic of picture tubes with a vertical slot
mask. There is no malfunction.
The screen display is too small or not centered
The monitor recognizes an undefined mode (see "Technical data").
i
To display the current mode (horizontal frequency and refresh rate), press the o
r
buttons.
Ê Press the picture size/position button to automatically adjust the screen display.
Ê Correctly adjust the picture size and position with the OSD menu (see "Operation of the
monitor", section "Setting picture position and size (SIZE/CENTER)").
Picture geometry is defective
Ê Correctly adjust the picture geometry with the OSD menu (see "Operation of the monitor",
section "Setting picture geometry (GEOMETRY)").
Colors are impure or shifted
Ê Degauss the monitor (see "Operation of the monitor", section "Setting monitor options
(OPTION)").
Ê Set the convergence (see "Operation of the monitor", section "Setting convergence
(CONVERGENCE)").
White does not look white
Ê Set the color temperature (see "Operation of the monitor", section "Setting color temperature
and colors (COLOR)").
Screen display has lines, is dull or blurred
Ê Set the brightness and contrast (see "Operation of the monitor").
Ê Degauss the monitor (see "Operation of the monitor", section "Setting monitor options
(OPTION)").
Ê Set the convergence and reduce the Moiré correction (see "Operation of the monitor", section
"Setting monitor options (OPTION)").
The screen display is flickering
Ê Set an ergonomic refresh rate (75 Hz) using the PC software (see documentation for your PC
or your screen controller/graphics card).
Monitor adjustment buttons do not react
The buttons have probably been locked with the OSD menu.
Ê Unlock the monitor adjustment buttons (see "Operation of the monitor", section "Setting monitor
options (OPTION)").
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu 19T2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info