Bedienungsanleitung Fujitsu fi 6010n (Seite 5 von 21) (Englisch)

213056

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

vii

Do not touch the inside of the scanner

unless necessary.

Do not use the scanner if you smell a

strange odor.

Do not use aerosol sprays near the

scanner.

Do not place the scanner within the reach

of small children.

Do not touch the heated section for a long

time.

Do not cover the scanner with something

during its operation.

Do not use the scanner where it gets wet.

Do not install the scanner on unstable

surfaces.

Do not block the ventilation ports.

Do not place heavy objects or climb on

top of the scanner.

Firmly insert the power plug.

Do not take apart or modify the scanner.

The inside of the scanner contains high-

voltage components. Touching these

components might cause electric shock or

fire.

If you detect heat coming from the device or

detect other problems such as smoke,

strange smells or noises, immediately turn

off the scanner and then disconnect its

power plug. Make sure that any smoke

coming from it has stopped, before

contacting your FUJITSU scanner dealer or

an authorized FUJITSU scanner service

provider.

Do not use any aerosol sprays or alcohol

based sprays to clean the scanner.

Dust blown up by strong air from the spray

may enter the inside of the scanner. This

may cause the scanner to fail or

malfunction.

Sparks, caused by static electricity,

generated when blowing off dust and dirt

from the outside of the scanner may cause

a fire.

To avoid injuries, do not place the scanner

in an area where small children may be able

to reach.

Do not touch the heated section such as the

bottom of the scanner for a long time.

Doing so may cause a low-temperature

burn on your skin.

Do not use the scanner while covered with a

blanket, etc. Doing so may raise the

temperature inside and cause a fire.

Do not use the scanner at a place such as a

bathroom, shower room, or swimming pool

where it may easily get wet. Doing so might

cause electric shock or fire.

Make sure that the scanner is installed on a

flat, level surface and that none of its parts

extend beyond the surface top, such as a

desk or table. Do not install the scanner on

unstable surfaces. Install the scanner on a

level surface that is free of vibration to

prevent it from falling.

Install the scanner on a strong surface that

will support the weight of the scanner and

other devices.

Do not block the ventilation ports. Blocking

the ventilation ports generates heat inside

of scanner, which may result in fire or

scanner failure.

Do not place heavy objects on the scanner

or use the scanner's surface top to perform

other work. Improper installation might

cause injuries and equipment failure.

Firmly insert the power plug as far it can go

into the power outlet.

fi-6010N Network Scanner Getting Started

viii

Avoid any contact when scanner is in use.

Do not use the scanner immediately after

moving it from a cold place into a warm

room.

Before moving the scanner, disconnect

the power plug from the power outlet.

Protect the scanner from static electricity.

Disconnect the power plug from the

power outlet when the scanner is not used

for a long period of time.

Do not install the scanner in the direct

sunlight.

Handle documents carefully.

Do not make the scanner wet while

carrying it outside.

Do not place the scanner in areas, which

are subject to high levels of shock or

vibration.

Avoid touching any scanner mechanism

during scanning since this may cause

injuries.

Do not use the device immediately after

moving it from a cold place into a warm

room. Condensation may occur, which

might lead to scanning errors. Let the

device dry about one or two hours before

you use it.

Do not move the scanner with the power

and interface cables connected as this can

damage the cables, which can later cause

fire, electric shock as well as injury.

Before moving the scanner, be sure to

disconnect the power plug from the power

outlet, and all other data cables.

Make sure that the floor is free of any

obstructions.

Install the scanner away from strong

magnetic fields and other sources of

electronic noise. Also, protect the scanner

against any static electricity, which can

cause the scanner to malfunction.

When the scanner is not going to be used

for a long period of time, be sure to

disconnect the power plug from the power

outlet for safety.

Do not install the scanner under direct

sunlight or near heating apparatus. Doing

so might cause excessive heat to build up

inside the scanner, which can cause

scanner trouble or even fire. Install the

scanner in a well-ventilated location.

When handling documents, be careful not to

cut your fingers with them.

When carrying the scanner outside while it

is raining or snowing, pay special attention

so the scanner does not get wet.

Do not place the scanner in areas, which

are subject to high levels of shock or

vibration. Doing so may cause the scanner

to malfunction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujitsu fi 6010n Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujitsu fi 6010n

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info