617171
46
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
Security functions
Changing the super vi so r or user password
You can only ch ange the supervisor passwo rd when you have logged into the
BIOS Setup Utility with the supervisor password.
PasswordSupervisorpasswordUserpassword
Call the BIOS Setup Utility andgototheSecurity menu.
When changing the password, proceed exactly as for password assignment.
Removing passwords
To remove a password (without setting a new password) p erform the following steps:
PasswordSupervisorpasswordUserpassword
Start the B IOS Se tup Utility and go to the Security menu.
Highlight the Set Supervisor Password or Set User Password eld an d press the Enter key.
Enter current Password then requires you to enter the current password.
Enter new Password requires you to enter a new password.
Press the Enter key twice.
Select the Save Changes and Exit option in the Exit menu.
Select Yes and press the Enter k ey.
Your notebook will now restart and the password is removed.
Removing the supervisor password simultaneously deactivates the user password.
Password protection of operating syste
m
With the supervisor password that you have set in the B IOS Setup Utility
(see "
Setting sup ervisor and user password", Page 35 section), you ca n
also prevent bo oting of the operating system.
Operating system
Activating system protection
Call the BIOS Setup Utility andgototheSecurity menu.
Operatingsystem
Select the Password on Boot option and press the Enter key.
Select Enabled and press the E nter ke y.
Select the Save Changes and Exit option under Exit.
The n otebook restarts. You will be p ro mpted to enter your password (the supervisor password).
Deactivating system protection
Call the BIOS Setup Utility andgototheSecurity menu.
Operat
ingsystem
Select the Password on Boot option and press the Enter key.
Select Disabled and press the Enter key.
If you do not want to make any other settings, you can exit BIOS Setup Utility.
Select the Save Changes and Exit option under Exit.
The notebook restarts. The system is no longer password-protected.
36 10600900868, editio n 1
46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu Siemens AMILO Li2735 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fujitsu Siemens AMILO Li2735

Fujitsu Siemens AMILO Li2735 Bedienungsanleitung - Holländisch - 73 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info