503751
6
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
6 EN
PREPARATION FOR USE
Antenna Connection
1)
Insert the RF cable plug into the Aerial input jack at the
back of this unit.
2) Plug this unit into an AC outlet.
3) The STANDBY/POWER indicator on the front panel lights
red, then press
STANDBY-ON on the control panel or the
remote control to turn the unit on.
PROG. (+/
-
or / ) can also be used to turn the unit on.
External Connection
[HDMI CONNECTION]
This is the best method to connect this TV to video devices with
the HDMI output jack, such as DVD player with HDMI output
jack, etc. It can minimize the deterioration of image quality.
Use the HDMI cable (commercially available) for connection.
Connect the HDMI output jack of your video device to the
HDMI input jack of this unit.
Note:
This TV accepts 480i / 480p / 576i / 576p / 720p (50 Hz) /
720p (60 Hz) / 1080i (50 Hz) / 1080i (60 Hz) video
signals, and 32 kHz / 44.1 kHz / 48 kHz audio signals.
This TV accepts only 2 channel audio signals (LPCM).
You need to select “PCM” for the digital audio output of
the device you connect or the HDMI audio setting.
Audio sometimes makes no sound if you select
“Bitstream”, etc.
<When your video device has the DVI output jack…>
1) Connect the DVI output jack of your video device to the
HDMI input jack of this unit. Use the HDMI cable
(commercially available).
2) Connect the audio output jacks of your video device to the
HDMI AUDIO input jacks of the unit.
Note:
This TV accepts 480i / 480p / 576i / 576p / 720p (50 Hz) /
720p (60 Hz) / 1080i (50 Hz) / 1080i (60 Hz) video
signals.
Audio signals are converted to an analogue signal from
the digital if you make a connection above.
VHF/UHF
MIXER
VHF
UHF
To Aerial input jack
Rear of this TV
RF cable (not supplied)
AUDIO
HDMI IN
R
L
HDMI
HDMI OUT
Rear of this TV
To HDMI input jack
To HDMI output jack
HDMI cable (not supplied)
“HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.”
The “HD ready” Logo is a trademark of EICTA.
AUDIO
HDMI IN
R
L
HDMI
DVI OUT
AUDIO OUT
RL
Rear of this TV
HDMI cable (not supplied)
To audio
output jacks
To HDMI input jack
To HDMI AUDIO
input jacks
audio cable (not supplied)
To DVI output jack
L5950EA(EN).fm Page 6 Friday, March 30, 2007 2:46 PM
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Funai LCD-C3206 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info