Bedienungsanleitung Funai PB1-M200 (Seite 4 von 64) (Englisch)

503771

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

4EN

Notice for the Progressive Scan

Outputs

Consumers should note that not all high definition

television sets are fully compatible with this product

and may cause artifacts to be displayed in the picture.

In case of picture problems with 480 or 576 progressive

scan output, it is recommended that the user switch

the connection to the ‘standard definition’ output. If

there are questions regarding your TV set compatibility

with this 480p or 576p product, please contact our

customer service centre.

Note for Batteries

Lithium Ion Battery Pack :

• Do not leave the battery pack in a car exposed to

direct sunlight for a long time with no ventilation.

• Do not use or connect the battery pack with other devices.

• Do not touch the plug terminals (+ / -) with metal objects.

• Do not use this unit outside when raining or snowing.

(The battery pack is not waterproof.)

• Please prevent any foreign matter (dirt, liquids, etc.)

from getting inside of the unit.

• Do not disassemble, remodel, heat or burn the

battery pack.

• Detach the battery pack is not going to be used for a

month or more.

Button-type Lithium Battery :

• Do not leave the battery in a car exposed to direct

sunlight for a long time with no ventilation.

• Do not recharge, short-circuit, heat or burn the battery.

• Remove battery from battery compartment of the remote

control that is not going to be used for a month or more.

• Do not touch the terminals (+ / -) with metal objects.

• Keep the battery out of reach of children to prevent

swallowing.

• When disposing of used battery, please comply with

governmental regulations or environmental public

rules that apply in your country or area.

Warning

• Risk of fire and burns. Do not disassemble.

Do not heat the batteries above the

following temperatures or incinerate.

Lithium ion battery pack: 60°C

Button-type lithium battery: 100°C

• Do not rest the unit on your lap for a long

time while using it. The unit can become hot

and cause burns.

• Never store or use this unit, battery pack

and AC adapter in a locked and unventilated

vehicle. (where excessive internal

temperatures may be encountered.) Doing

so may result in fire or damage to the

exterior components and internal parts.

Maintenance

Cleaning the Unit

• Use a soft cloth slightly moistened with a mild

detergent solution. Do not use solutions containing

alcohol, spirits, ammonia or abrasives.

• Disconnect the AC adapter and detach the battery

pack when cleaning the unit.

• Rubbing or wiping the LCD screen and around the

LCD screen with hard cloth may scratch the surface.

Cleaning Discs

If a disc becomes dirty, clean it with a cleaning cloth.

Wipe the disc from the centre to the outer edge. Do not

wipe in a circular motion.

Do not use solvents such as benzine, thinners,

commercially available cleaners, detergent, abrasive

cleaning agents or antistatic spray intended for

analogue records.

Disc Handling

Handle the discs so that fingerprints and dust do not

adhere to the disc surfaces.

Always store the disc in its protective case when it is

not in use.

Servicing

If the unit becomes inoperative, do not try to correct

the problem by yourself. There are no user serviceable

parts inside. Turn the unit off, disconnect the AC

adapter and detach the battery pack, and consult your

dealer or an authorised service centre.

Cleaning the Disc Lens

If the unit does not perform correctly even though you

have referred to “Troubleshooting” and the relevant

sections in the Owner’s Manual, the laser optical pickup

unit may be dirty. Consult your dealer or an authorised

service centre for inspection and cleaning of the laser

optical pickup unit.

IR Signal Check

If the remote control is not working properly, you can

use a digital camera (including a cellular phone with

built-in camera) to see if it is sending out an infrared

signal.

With a digital camera

(including built-in cell phone cameras):

Point a digital camera towards the

remote control. Push any button on

the remote control and look through

the digital camera. If the infrared

light appears through the camera,

the remote control is working.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Funai PB1-M200 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info