Server FI-3005
The server is the heart of the FI-30 instrumentation network. It is also
an intelligent junction box for the transducers and sensors. Furuno
NavNet equipment can also be connected through the NMEA digital
interface. (NMEA is a standard on the server.)
Enclosure: Splashproof
Power supply: 12 VDC, 27 mA
S/T Sensor FI-3002
The paddlewheel speed sensor molded in
the unique plastic housing is fitted under
the hull. Retractable through hull mount for
easy replacement or cleaning. Dummy
plug included.
Depth Transducer FI-3001
The depth sounding transducer is fitted
under the hull. The display unit permits
settings of measurement below water
surface or keel.
Frequency: 200 kHz
Wind Sensor FI-3003
Sensitive and stable sensor provides accurate
wind speed and direction for the network. Easy,
snap-in attachment for mast mounting included.
Accuracy: Angle ± 0.5%
Speed ± 0.5 m/s (kt, bf)
Power supply: 12 VDC, 20 mA
Cable: 25 m
Fluxgate Compass FI-3004
Gimbaled and liquid damped for superb stability in rough
seas. Sensitivity and accuracy are proven over years of
installation and through continued technical improvement.
The sensor is automatically corrected for deviation in the
Multi Control.
Accuracy: ± 1.5%
Sensitivity: ± 0.1°
Pitch and roll: 45°
Power supply: 12 VDC, 25 mA
Cable: 8 m
Integrated Heading Sensor
PG-500
An inexpensive electromaganetic compass
provides a highly accurate and stable readout of
the ship's heading thanks to the sophisticated
structure by three-axis magnetometer, incliometer
and integral vibrating gyrosensor.
Accuracy: ± 1.5%
Sensitivity: ± 0.1°
Pitch and roll: 35°
Power supply: 12-24 VDC
Magnetic variation: Automatic compensation
(Appropriate GPS
Navigator required.)
Magnetic deviation: Automatic re-calibration
