Bedienungsanleitung Fusion Apollo MS-ERX400 (Seite 9 von 12) (Englisch)

740411

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Insert the USB storage device in the USB port of a

compatible Fusion PartyBus stereo on the network.

On the ERX400, select > SETTINGS.

Select the name of the remote control.

Select UPDATE > ERX REMOTE.

TIP: If the stereo with the USB storage device has a screen,

you can also start the remote control update process form the

UPDATE settings menu of the stereo.

The stereo transfers the update file to the remote control over

the network, the remote control updates the software, and

then restarts.

Updating the Remote Control Software Using the

Fusion Link App

You must connect the Fusion-Link app to the network using a

wireless router or wireless access point to update the software.

You cannot update the software using a Bluetooth connection.

If the Fusion PartyBus network has a wireless router or wireless

access point, you can update the remote control software using

the Fusion-Link app, available for compatible Apple

or Android

™

on the Apple App Store

or the Google Play

™

store.

NOTICE

Do not turn off the device or disconnect the power during a

software update. Turning off the power during a software update

may cause the device to become unresponsive.

NOTE:

• The device may restart a few times when updating. This is

normal.

• You can program only newer versions of software on the

device.

Connect your mobile device to a wireless router or wireless

access point on the Fusion PartyBus network.

Open the Fusion-Link app, and verify that you can see the

remote control in the app.

If the Fusion PartyBus is not connected to the internet,

disconnect the mobile device from the wireless router or

access point.

In the Fusion-Link app, select > CHECK FOR UPDATES >

MS-ERX400.

The app downloads the software update file.

If the Fusion PartyBus is not connected to the internet, after

the app finishes downloading the update file, reconnect the

mobile device to the wireless router or access point on the

Fusion PartyBus network.

In the Fusion-Link app, select the name of the remote control.

Select CHECK FOR UPDATES.

The app transfers the software update to the remote control

over the network, the remote control updates the software,

and then restarts.

Troubleshooting

The stereo does not respond to key presses

• Hold until the stereo turns off, and turn it on again to reset

the stereo.

• Disconnect power to the stereo for two minutes to reset the

stereo.

Network Troubleshooting

If you cannot see or connect to Fusion PartyBus devices on the

network, check the following:

• Verify that only one device, either a stereo or a router, is

configured as a DHCP server.

• Verify that all Fusion PartyBus devices, network switches,

routers, and wireless access points are connected to the

network and turned on.

• Verify that wireless Fusion PartyBus devices are connected

to a wireless router or wireless access point on the network.

NOTE: Wired connections are more reliable than wireless

connections. If possible, you should connect devices to the

network using an Ethernet cable.

• You may experience wireless interference if there are many

nearby wireless access points. Change the channel on your

router or wireless access point to test for and correct

interference.

• Connecting a Bluetooth device to a stereo configured as a

wireless access point or client may reduce wireless

performance. Disconnect Bluetooth devices to test for and

correct interference.

• If you configured static IP addresses, verify that every device

has a unique IP address, that the first three sets of numbers

in the IP addresses match, and that the subnet masks on

every device are identical.

• If you have made configuration changes that might be

causing networking issues, reset all network settings to the

factory default values.

Network Status Icons

A network-status icon is shown on some screens of the device.

You can refer to this table to understand the appearance of the

icon and help diagnose issues with the Fusion PartyBus

network.

The device is connected correctly to a network.

The device cannot detect the network. An Ethernet cable may not

be connected or there may be other problems with the network.

Specifications

Dimensions (W × H) 11 × 7 cm (4.32 × 2.76 in.)

Dust cover dimensions (W

× H)

11.8 × 8 cm (4.66 × 3.15 in.)

Weight (excluding cable) 100 g (3.5 oz.)

Input voltage From 10.8 to 32 Vdc negative ground

Current (normal

operation)

Normal operation: 150 mA at 12 Vdc

Normal operation: 125 mA at 14.4 Vdc

Current (device off) STANDBY MODE enabled: 19 mA at

14.4 Vdc

STANDBY MODE disabled: 7 mA at

14.4 Vdc

Fuse 1 A ATO blade-type

Compass-safe distance 15 cm (6.1 in.)

Operating temperature From 0 to 50°C (from 32 to 122°F)

Storage temperature From -20 to 70°C (from -4 to 158°F)

Water rating IEC 60529 IPX6 and IPX7

Dimensions

The device withstands incidental exposure to water of up to 1 m for up to 30 min,

and is protected against powerful jets of water. For more information, go to

www.garmin.com/waterrating.

More Information 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion Apollo MS-ERX400 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion Apollo MS-ERX400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info