Bedienungsanleitung Fusion StereoActive (Seite 7 von 10) (Englisch)

691356

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

The first time you open the app on the watch, the watch

automatically pairs with and connects to the stereo. If you

need to pair to another stereo, in the FUSION-Link app,

select Settings > Pair new.

Control the audio playback using the FUSION-Link app on

the watch.

After the devices are paired, they connect automatically when

they are turned on, within range, and the app is open on the

watch.

Attaching the FUSION Puck

™

Mount

You can attach the puck mount to a flat surface using the

included adhesive or screws. Refer to the manual for the item on

which you are mounting the puck mount for information about

the preferred mounting style.

If these mounting options are not sufficient for your mounting

surface, go to www.stereoactive.com for more mounting

accessories.

Attaching the Puck Mount Using Adhesive

NOTICE

Before placing the adhesive on the mounting surface, make sure

that the location and orientation are correct. It is extremely

difficult to remove the adhesive. The adhesive and puck mount

cannot be reused after being removed from a surface. Some

mounting surfaces might be damaged after removing the

adhesive.

Select an appropriate location for the stereo.

Before securing the puck mount, make sure it is oriented in

the preferred direction.

Thoroughly clean and dry the mounting surface using a

mixture of water and isopropyl alcohol.

The mounting surface must be free of dirt, debris, wax, or

coatings.

Remove the backing from one side of the adhesive.

Press the adhesive to the bottom of the puck mount.

Remove the backing from the other side of the adhesive.

Carefully orient the puck mount, and press the puck mount

firmly onto the mounting surface.

Allow the puck mount to sit at room temperature for 72 hours.

NOTICE

Before attaching the stereo to the puck mount, allow the

adhesive to bond to the mounting surface for 72 hours. Failure

to allow adequate bonding time may cause the mount to detach

from the surface, which could result in damage to the stereo or

mount.

Attaching the Puck Mount Using Screws

NOTICE

Before screwing into the surface, check with the manufacturer of

the item on which you are mounting the puck to verify that

screws should be used. Some surfaces are too thin to support

screws, and the adhesive should be used on these surfaces.

Select an appropriate location for the stereo.

Before securing the puck mount, make sure it is oriented in

the preferred direction.

Using the puck mount as a template, mark the location of the

holes.

Remove the mount.

Using a drill bit appropriate for the mounting surface, drill the

pilot holes.

Secure the mount to the surface with the included screws or

other screws suitable for the surface.

Attaching the Stereo to the Puck Mount

CAUTION

When playing audio with high bass content and at high volume,

the stereo may move across the surface if it has not been

mounted on the puck. When not on the puck mount, place the

stereo on a soft surface to reduce the likelihood of the stereo

moving.

Slide the locking lever fully to the left.

Place the stereo on the puck in the direction that provides the

best listening experience.

You can place the stereo on the puck in four different

directions to aim the speakers in the right direction.

Slide the locking lever to the right to lock the stereo on the

puck.

Puck Cover

CAUTION

To avoid potential injury from the exposed puck mount, always

fit the included rubber puck cover over the mount when not in

use.

More Information

Installing a Different Language for the Voice

Prompts

You can change the language of the voice prompts. Choose

from English, Dutch, French, German, Italian, and Spanish.

Go to www.stereoactive.com.

Follow the on-screen instructions.

Specifications

Water rating Fully gasketed, floatable, IEC 60529 IPX7*

Dimensions (W × H × D) 236 mm (9.29 in.) × 82 mm (3.23 in.) ×

139 mm (5.47 in.)

Weight 1.3 kg (2.87 lb.)

Battery type Rechargeable lithium-ion

Battery life Up to 20 hours

Charging requirements 100 to 240 Vac AC power adaptor (included)

or 12 Vdc 2 A car adaptor (optional

accessory); charges within 3 hours

Operating temperature

range

From 0° to 50°C (from -32° to 122°F)

Charging temperature

range

From 10° to 45°C (from 50° to 113°F)

Long-term storage

temperature range

From -20° to 70°C (from -4° to 158°F)

Compass-safe distance 1.37 m (54 in.)

Bluetooth wireless

range

Up to 10 m (33 ft.)

Bluetooth profiles A2DP, AVRCP, SPP

Attaching the FUSION Puck

™

Mount 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion StereoActive Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion StereoActive

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info