Bedienungsanleitung Fusion WS-SA150 (Seite 6 von 10) (Englisch)

691948

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

connectors get wet, rinse them thoroughly with fresh water

and allow to dry before using the stereo again.

Battery Status

When you press and , you can hear the status of the

battery charge.

Battery Full: The battery has more than about 95% charge

remaining.

Battery OK: The battery has between about 15% and 95%

charge remaining.

Battery Low: The battery has less than about 15% charge

remaining. You should connect the charger to recharge the

battery.

Connecting Devices

Connecting a Compatible Bluetooth Device

to the Stereo

You can play media from a compatible Bluetooth device using

the Bluetooth wireless connection.

You can control the music playback with the media app on a

Bluetooth device or using the FUSION-Link

™

smartphone app.

For information about the FUSION-Link app for compatible

Apple

or Android

™

devices, go to the Apple App Store

or the

Google Play

™

store.

Enable Bluetooth on your compatible Bluetooth device.

Bring the compatible Bluetooth device within 10 m (33 ft.) of

the stereo.

On the stereo, press and hold until you hear

Discoverable.

The stereo remains discoverable for two minutes.

On your compatible Bluetooth device, select StereoActive

from the list of discovered devices.

If your compatible Bluetooth device does not connect to the

stereo, repeat the above steps.

Play music using your Bluetooth device.

Immediately after the stereo is turned on, it connects

automatically to the last connected device when it is within

range and Bluetooth wireless technology is enabled.

You can connect a previously paired Bluetooth device by

selecting StereoActive from the Bluetooth device's list of

previously paired devices.

Connecting a Compatible USB Device to the

Stereo

NOTICE

The end cap must be properly inserted and locked to achieve

the IPX7 water rating. The stereo is water resistant without the

end cap, but to prevent damage to the USB and power

connectors, insert and lock the end cap when using the stereo

on or near water, especially saltwater. If the connectors get wet,

rinse them thoroughly with fresh water and allow to dry before

using the stereo again.

You can connect a compatible USB flash drive, compatible

Apple device, or compatible Android AOA device to the USB

port to play music and charge compatible Apple or Android

devices.

The FUSION-Link smartphone app is required to navigate

folders on the USB flash drive. When using a USB flash drive

without the FUSION-Link app, the stereo plays music files saved

in the root directory by default. If the FUSION-Link app has been

previously used to navigate to a different folder on the USB

drive, the stereo plays music files from the last folder navigated

to.

When using a USB flash drive, the file load time varies based on

size of the flash drive and the number of files on the flash drive.

Connect the USB flash drive or the USB cable included with

your media player to the USB port on the stereo.

NOTICE

When on or near water, the end cap should be locked on the

device. To play music from a USB source on the water, you

should use a small USB flash drive so you can replace and

lock the end cap to avoid corrosion.

Play music using the connected USB device.

When an unsupported USB device is connect, the stereo beeps

to indicate the error.

One beep Unsupported hub attached

Two beeps Unsupported USB device attached

Three beeps Device not responding

Four beeps Unsupported USB device attached

that exceeds the 1 A charging

rating of the stereo

USB Flash Drive Size

When on or near water, the end cap should be locked on the

device, to maintain the IPX7 water rating and to avoid corrosion.

To ensure the end cap can be properly inserted and locked, you

must use a low profile USB flash drive that is no longer than

22 mm (0.86 in.), measuring from end to end.

The optional FUSION

MS-USB16 accessory is a low-profile,

16 GB flash drive, and is the correct size to allow the end cap to

be inserted and locked.

22 mm (0.86 in.) maximum

FUSION-Link Smartphone App

You can use the FUSION-Link smartphone app on your

compatible Apple or Android device to adjust the stereo volume,

change the source, control playback, and adjust some stereo

settings.

The app communicates with the stereo using the Bluetooth

connection for the mobile device. You must connect your

compatible device to the stereo using Bluetooth to use the app.

For information about the FUSION-Link smartphone app for

compatible Apple or Android devices, go to the Apple App Store

or the Google Play store.

Connecting a Garmin

Watch to the Stereo

For a list of a compatible Garmin watches, go to

www.stereoactive.com.

For more information about the watch, see the watch manual at

www.garmin.com/manuals.

Following the instructions in the watch manual, install the

FUSION-Link app from the Connect IQ

™

store onto the

watch.

On the stereo, press and hold until you hear

Discoverable.

The stereo remains discoverable for two minutes.

Bring the watch within 3 m (10 ft.) of the stereo.

NOTE: Stay 10 m (33 ft.) away from other ANT

devices

while pairing.

Open the FUSION-Link app on the watch.

2 Connecting Devices

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fusion WS-SA150 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fusion WS-SA150

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info