)87
DSDQ
3KRQH)DFVLPLOH
©FUT
A
h
t ow
*Fixed at neutral if a servo is connected to a port other than a usable transmitter channel.
*The telemetry and Extra V
.
T
（
T
）
.
Press and hold the Link/Mode button f
.
When the link LED begins to blink green/red the b
.
The link LED should now be b
char
.
Each press of the Mode/Link button adv
.
Link button f
.
Once lock
.
Please cycle the receiver(s) po
Channel Mode.
Link LED Red blink System
FASST
FASST Multi-ch Normal mode
3 FASST Multi-ch High-speed mode
.
T
（
T
）
.
Press and hold the Link/Mode button f
.
When the link LED begins to blink red the b
.
The link LED should now be blinking red in one of the patterns described by the
char
.
Each press of the Mode/Link button adv
.
Link button f
.
Once lock
.
Please cycle the receiver(s) po
Channel Mode.
Link LED Red blink System
S.BUS
DG2
F
F is a bidirectional communication system between the R7014SB receiver and F capable transmitters. Multiple optional telemetry sensors
may be connected to the S.BUS2 on the receiver and that data is in turn displayed on the transmitter
*Please see your transmitter's operation man
Bring the transmitter and the receiver close to each other
meter).
T
The receiver will w
that it will return to the nor
When the link LED of the receiver changes from b
linking is complete.
•
transmitter into the linking mode.
•
difficulty establishing a link to your tr
another F
to the wrong transmitter
to av
really under control by your tr
• If the System
transmitter
.
S.BUS2 extends S.BUS and supports bidirectional communication. Sensors
are connected to the S.BUS2 port.
*Only S.BUS2 capab
and gyros should not be connected to the S.BUS2 port.
It connects with the battery for power
$Q X
voltage of the battery can be displayed with a transmitter
When using a TMA-1 (sold separately), change the settings by the following
method.
The TMA-1 is a device for viewing the telemetry data on a smartphone or
tablet.
.
Switch the receiver to F
.
Link the transmitter and receiver
power
.
.
Press the Link/Mode switch f
.
.
The
simultaneously begins to rapidly b
.
Press the star
TMA-1 to link.
.
for a moment.
.
operation of all the de
Bring the transmitter and the receiver close to each other
meter).
Link operation is perf
•
0 to 1 sec. 1 to 2 sec. More than 2 sec.
0 sec. 1 sec. 2 sec.
Press and Hold time
No function
With TM-8
(not included in this set)
To set the F/S
position(No re-link)
Re-link(ID set) and to
set the F/S position
No function
Besides TM-8
Re-link(ID set)
*
Refer to the instruction manual of the transmitter or module used f
linking operation, F/S position setting methods and other details.
TheMPDX-1 can beF by
transmitter
using theMPDX-1 FA system,
change the setting by the following method. Enable the MPDX-1 at channels 1
12. (Initial value: OFF) Channels 1MPDX-
.
Switch the receiver to the F
.
.
Press the Link/Mode switch f
.
.
The receiver enters the multi prop mode and the LED of the current mode
blinks.
.
Each time the switch is pressed, the mode changes
.
switch f
.
When the link LED begins to rapidly blink red and g
complete.
.
on, the receiver s
When switched, the R7014SB can use the F mode. When the F system is used, the telemetry and Extra V
FV\VWHPKDVD1RUPDOPRGHDQGD+LJKVSHHGPRGH+RZHYHULQWKH+LJKVSHHGPRGHDQDORJVHUYRVFDQQRWEHXVHGDW&+
-
6.
Link LED Green blink Mode
1 time
Multi prop mode OFF
2 time
Multi prop mode ON
F
1 output.The MPDX-1 H[WHQGV FKDQQHOV +RZHYHU WKH
speed becomes slower
operation and other applications that require numerous channels.
