678960
15
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
15
6. Press the “ ” button to start cleaning. The ultrasonic cleaner will now start the
cleaning process. The indicator remains lit during this process. The device will stop
cleaning after approx. 5 minutes. You may press the “ ”, button to stop the process
beforehand. The cleaning process will stop.
7. Make sure your hands are dry and remove the plug from the wall socket.
8. Open the lid.
9. Remove the cleaned object from the water reservoir.
10. Empty the water reservoir when not in use for a prolonged period of time or when
the water is heavily polluted.
INSTRUCTIONS
When filling with fresh tap water, based on the lime content, please keep in mind the
degassing time (optimal cleaning results are obtained using degassed water, e.g.
boiled, decalcified or distilled). In other cases we recommend you, for degassing the
water, to fill the device with water and have it operate for 3 cycles before inserting any
objects. When the water hasn’t been used for some time, it’s recommended to degas
the water again.
PROLONGED USE
Keep in mind that when used for a longer period of time (starting the cleaning process
multiple times in a row) the water and the reservoir may become warm. In this case,
please take a break to allow the water and the reservoir to cool down (we recommend
a 3 minutes pause in between cleaning processes). Using the device with the tank
being too warm may affect its life span and may loosen the vibration element.
MAINTENANCE
The FC-22 is maintenance free and thus requires no maintenance.
If necessary you may cleaning the exterior with a moist cloth; never use chemical
cleaning agents.
Don’t place the cleaner on surfaces treated with cellulose; the rubber feet may leave
tracks.
ATTENTION
Pay attention while cleaning glasses. An already loosened coating or colour layer on the
glass or frame may be further loosened when using the FC-22. When in doubt, don’t use
the FC-22 for glasses with coating.
Specications:
Ultrasonic Cleaner FC-22
Power Supply: 220-240V~ 50/60Hz
Power: 50W
Tank Capacity: 500ml
Timer: ± 5 mins
Dimension of Machine: 200×190×126mm
Net Weight: 720g
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fysic FC-22 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info