Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
FD-110 Installation
Outdoor-unit:
Indoor-unit:
Important Note:
If you do not plan to use the device for a long time, such as at a vacation, please remove the
battery from Transmitter, then put them in a safe place.
Improperly using a battery may cause it to leak and damage nearby items, and can create the
risk of fire and personal injury. Batteries should not be left in an area where the children can
reach them as they may pose a chocking hazard.
Recycle used batteries following environmental protection practices.
Transmitter Installation:
Stick the Transmitter on the wall or the door with
double-sided adhesive tape.
Receiver Installation:
Plug the Receiver into any socket of AC110~240V power.
2
Battery Installation (Transmitter):
Transmitter uses a 3V CR2032 battery (included).
Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)
and place the battery. Please be well noted with the correct battery polarity. To replace a new
battery, operate in the same way.
Press lightly the battery
holder at side
CR2032 3V Lithium Battery
Important Note:
If you do not plan to use the device for a long time, such as at a vacation, please remove the
battery from Transmitter, then put them in a safe place.
Improperly using a battery may cause it to leak and damage nearby items, and can create the
risk of fire and personal injury. Batteries should not be left in an area where the children can
reach them as they may pose a chocking hazard.
Recycle used batteries following environmental protection practices.
Transmitter Installation:
Stick the Transmitter on the wall or the door with
double-sided adhesive tape.
Receiver Installation:
Plug the Receiver into any socket of AC110~240V power.
2
Battery Installation (Transmitter):
Transmitter uses a 3V CR2032 battery (included).
Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)
and place the battery. Please be well noted with the correct battery polarity. To replace a new
battery, operate in the same way.
Press lightly the battery
holder at side
CR2032 3V Lithium Battery
Connecting:
Important Note:
If you do not plan to use the device for a long time, such as at a vacation, please remove the
battery from Transmitter, then put them in a safe place.
Improperly using a battery may cause it to leak and damage nearby items, and can create the
risk of fire and personal injury. Batteries should not be left in an area where the children can
reach them as they may pose a chocking hazard.
Recycle used batteries following environmental protection practices.
Transmitter Installation:
Stick the Transmitter on the wall or the door with
double-sided adhesive tape.
Receiver Installation:
Plug the Receiver into any socket of AC110~240V power.
2
Battery Installation (Transmitter):
Transmitter uses a 3V CR2032 battery (included).
Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)
and place the battery. Please be well noted with the correct battery polarity. To replace a new
battery, operate in the same way.
Press lightly the battery
holder at side
CR2032 3V Lithium Battery
1
Accessories List:
1 x Receiver 1 x Transmitter
1 x User Manual 1 x Double-sided adhesive
1 x 3 volts CR2032 battery for transmitter
Technical Specification:
Frequency: 433.92MHz+100KHz
Modulation Type: ASK
Ring Volume:85dB(within 0.5m)
Channel space: 1 million sets of auto-learning codes
Receiver bandwidth: ±90KHz
Reception Sensitivity:-105dBm
Transmitter Power:10mW
Power consumption(Receiver): standby:0.3W
Power consumption(Transmitter): standby:5uA working:10mA
Power Supply(Receiver): AC110-240V
Power Supply(Transmitter): DC 3V (1x CR2032)
Operating Range:150m (in the open air)
Names for Parts:
Instruction Manual
Auto-leaning Code Wireless Door Chime
Model No.: QH-861AK
VOL
MODE
CODE
3 sec.
1
Accessories List:
1 x Receiver 1 x Transmitter
1 x User Manual 1 x Double-sided adhesive
1 x 3 volts CR2032 battery for transmitter
Technical Specification:
Frequency: 433.92MHz+100KHz
Modulation Type: ASK
Ring Volume:85dB(within 0.5m)
Channel space: 1 million sets of auto-learning codes
Receiver bandwidth: ±90KHz
Reception Sensitivity:-105dBm
Transmitter Power:10mW
Power consumption(Receiver): standby:0.3W
Power consumption(Transmitter): standby:5uA working:10mA
Power Supply(Receiver): AC110-240V
Power Supply(Transmitter): DC 3V (1x CR2032)
Operating Range:150m (in the open air)
Names for Parts:
Instruction Manual
Auto-leaning Code Wireless Door Chime
Model No.: QH-861AK
VOL
MODE
CODE
Important Note:
If you do not plan to use the device for a long time, such as at a vacation, please remove the
battery from Transmitter, then put them in a safe place.
Improperly using a battery may cause it to leak and damage nearby items, and can create the
risk of fire and personal injury. Batteries should not be left in an area where the children can
reach them as they may pose a chocking hazard.
Recycle used batteries following environmental protection practices.
Transmitter Installation:
Stick the Transmitter on the wall or the door with
double-sided adhesive tape.
Receiver Installation:
Plug the Receiver into any socket of AC110~240V power.
2
Battery Installation (Transmitter):
Transmitter uses a 3V CR2032 battery (included).
Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)
and place the battery. Please be well noted with the correct battery polarity. To replace a new
battery, operate in the same way.
Press lightly the battery
holder at side
CR2032 3V Lithium Battery
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Transmitter Installation:

    ● Stick the Transmitter on the wall or the door with
    double-sided adhesive tape.

    FD-110 Installation

    Battery Installation (Transmitter):
    Receiver
    Installation:
    Indoor-unit:

    Transmitter
    uses
    a 3V of
    CR2032
    battery power.
    (included).
    ● Plug the Receiver
    into any
    socket
    AC110~240V
    Open the Transmitter (by pushing in the interface located at the bottom with a flat screw drive
    and place the battery. Please be well noted with the correct battery polarity. To replace a new
    battery, operate in the same way.

    Press lightly the battery
    holder at side

    attery Installation (Transmitter):

    ransmitter uses a 3V CR2032 battery (included).
    pen the Transmitter (byInstruction
    pushing inManual
    the interface located at the bottom
    with
    a Manual
    flat Battery
    screw dri
    Instruction
    CR2032
    3V Lithium
    nd place
    the battery.
    PleaseCode
    be well
    notedDoor
    with
    the correctAuto-leaning
    battery polarity.
    replaceDoor
    a newC
    Outdoor-unit:
    2 Chime
    Auto-leaning
    Wireless
    CodeToWireless
    attery, operate in the same
    way.
    Model
    No.: QH-861AK
    Model No.: QH-861AK
    Accessories List:

    Important Note:

    Accessories List:

    ● 1 x Receiver
    ● 1 x device
    Transmitter
    x Receiver
    ● 1 x Transmitt
    ● If you do not plan to use the
    for●a1long
    time, such as at a vacation, please remove
    the
    ● 1 x User Manual
    ● 1 x Double-sided●adhesive
    1 x User Manual
    ● 1 x Double-si
    battery from Transmitter, then put them● 1inx 3avolts
    safeCR2032
    place.battery for transmitter
    ● 1 x 3 volts CR2032 battery for transmitter

    Press lightly the battery

    ● Improperly using a battery may cause it to leak and damage nearby items, and can create th
    holder at side
    Technical Specification:
    risk of fire and personal injury. BatteriesTechnical
    should Specification:
    not be left in an area where the children can
    ● Frequency: 433.92MHz+100KHz
    ● Frequency: 433.92MHz+100KHz
    reach them as they may pose a chocking
    hazard.
    ● Modulation Type: ASK
    ● Modulation Type: ASK
    ● Recycle
    protection practices.
    ● Ring Volume:>85dB(within
    0.5m)used batteries following environmental
    ● Ring Volume:>85dB(within
    0.5m)
    ● Channel space: 1 million sets of auto-learning codes
    ● Channel space: 1 million sets of auto-learning codes
    ● Receiver bandwidth: ±90KHz
    ● Receiver bandwidth: ±90KHz
    ● Reception Sensitivity:>-105dBm
    ● Reception Sensitivity:>-105dBm
    ● Transmitter Power:<10mW
    ● Transmitter Power:<10mW
    Transmitter Installation:
    ● Power consumption(Receiver): standby:<0.3W
    ● Power consumption(Receiver): standby:<0.3W
    ● Stick the standby:<5uA
    Transmitterworking:<10mA
    on the wall or the●door
    ● Power consumption(Transmitter):
    Powerwith
    consumption(Transmitter): standby:<5uA working:<10mA
    ● Power Supply(Receiver):
    AC110-240V

    Power
    Supply(Receiver): AC110-240V
    double-sided adhesive tape.
    ● Power Supply(Transmitter): DC 3V (1x CR2032)
    ● Power Supply(Transmitter): DC 3V (1x CR2032)
    ● Operating Range:>150m (in the open air)
    ● Operating Range:>150m (in the open air)

    CR2032 3V Lithium Battery

    Receiver Installation:
    Connecting:
    mportant
    Names forNote:
    Parts: ● Plug the Receiver into any socket of AC110~240V
    Names for Parts:
    power.

    If you do not plan to use the device for a long time, such as at a vacation, please remove th
    battery from Transmitter, then put them in a safe place.
    Improperly using a battery may cause it to leak and damage nearby items, and can create t
    risk of fire and personal injury. Batteries should not be left in an area where the children ca
    reach them as they may pose a chocking hazard.
    Recycle used batteries following
    3 sec. environmental protection practices.
    CODE

    CODE

    MODE

    MODE

    VOL

    VOL

    ransmitter Installation:

    1

    Stick the Transmitter on the wall or the door with

    1

    2



  • Page 2

    Technical Specification:

    ● Frequency: 433.92MHz+100KHz
    ● Modulation Type: ASK
    ● Ring Volume:>85dB(within 0.5m)
    ● Channel space: 1 million sets of auto-learning codes
    ● Receiver bandwidth: ±90KHz
    ● Reception Sensitivity:>-105dBm
    ● Transmitter Power:<10mW
    CODE
    ● Power consumption(Receiver): standby:<0.3W
    Model No.: QH-861AK
    Model
    No.: QH-861AK
    MODE
    ● Power consumption(Transmitter): standby:<5uA working:<10mA
    ● Power Supply(Receiver): AC110-240V
    Accessories
    List:
    Accessories List:
    VOL
    ● Power Supply(Transmitter):
    DC 3V (1x CR2032)

    1
    x
    Receiver

    1
    x
    Transmitter

    1
    x
    Receiver
    ● 1 x Transmitt
    ● Operating Range:>150m (in the open air)
    ● 1 x User Manual
    ● 1 x Double-sided
    ● 1adhesive
    x User Manual
    ● 1 x Double-si
    Lamp,
    Ring, Lamp & Ring:
    ● 1 x 3 volts
    ● 1 x 3 volts CR2032 battery for transmitter
    Names
    for CR2032
    Parts: battery for transmitter

    RESET

    <10 sec.

    Instruction Manual
    Max. 60
    Auto-leaning Code Wireless Door Chime

    Instruction Manual
    Auto-leaning Code Wireless Door C

    5 sec.

    Technical Specification:

    ● Frequency: 433.92MHz+100KHz
    ● Modulation Type: ASK
    ● Ring Volume:>85dB(within 0.5m)
    ● Channel space: 1 million sets of auto-learning codes
    ● Receiver bandwidth: ±90KHz
    ● Reception Sensitivity:>-105dBm
    CODE
    ● Transmitter Power:<10mW
    MODE
    ● Power consumption(Receiver): standby:<0.3W
    ● Power consumption(Transmitter): standby:<5uA working:<10mA
    VOL
    ● Power Supply(Receiver):
    AC110-240V
    ● Power Supply(Transmitter): DC 3V (1x CR2032)
    ● Operating Range:>150m (in the open air)

    ● Frequency: 433.92MHz+100KHz
    ● Modulation Type: ASK
    ● Ring Volume:>85dB(within 0.5m)
    ● Channel space: 1 million sets of auto-learning codes
    ● Receiver bandwidth: ±90KHz
    ● Reception Sensitivity:>-105dBm
    ● Transmitter Power:<10mW
    ● Power consumption(Receiver): standby:<0.3W
    ● Power consumption(Transmitter): standby:<5uA working:<10mA
    ● Power Supply(Receiver): AC110-240V
    ● Power Supply(Transmitter): DC 3V (1x CR2032)
    ● Operating Range:>150m (in the open air)

    1x

    Change
    melody:
    Names for Parts:

    1

    Technical Specification:

    1

    Names for Parts:

    CODE

    CODE

    MODE

    MODE

    VOL

    VOL

    1x

    Service

    Help

    melody-1
    1
    ~NL 073 6411 355
    BE 03 238 5666
    melody-36

    WWW.FYSIC.COM
    SERVICE@FYSIC.NL
    (Lokaal tarief)

    (Lokaal tarief)
    (Tarif local)

    1x
    Volume
    H
    1
    Volume M
    Volume L

    Frequency: 433MHz ASK DE 0180 503 0085
    Hesdo, Australiëlaan 1
    Transmission power: <10mW
    5232 BB, ‘s-Hertogenbosch
    Declaration of conformity: The Netherlands
    http://DOC.hesdo.com/FD-110-DOC.pdf
    Lokale Festnetzkosten

    Service

    WWW.FYSIC.COM
    SERVICE@FYSIC.NL

    NL 073 6411 355 (Lokaal tarief)
    (Lokaal tarief)

    Help

    BE 03 238 5666 (Tarif local)

    DE 0180 503 0085 (Lokale Festnetzkosten)
    Hesdo, Australiëlaan 1, 5232 BB,
    ‘s-Hertogenbosch, The Netherlands

    v1.0






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fysic FD-110 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Fysic FD-110 in der Sprache / Sprachen: Alle Sprachen als Anhang in Ihrer E-Mail.

Das Handbuch ist 1,55 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info