Bedienungsanleitung Fysic FX 5500 (Seite 2 von 2) (Englisch)

458134

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

7.4 Copying / deleting:

open the Caller-ID memory

and search for the desired call

press the MENU button and select:

• SAVE NUMBER to save the selected

number

• DELETE to delete the call

• DELETE ALL to delete all last incoming

calls

press the OK button and follow the on-screen

instructions

8 TIME & DATE

8.1 Time and date setup:

1. open the menu and select CLOCK &

ALARM

2. press the OK button and select DATE/TIME

3. press the OK button and use the keypad

to enter the following in order:

- the last 2 digits of the year

- the month (use 2 digits)

- the date (use 2 digits)

4. press the OK button and use the keypad

to enter the following in order:

- the hours (use 2 digits)

- the minutes (use 2 digits)

5. press the OK button and the End button

to return the handset to standby mode

conference:

as soon as the call is answered, briey

press and hold the INT button to start the

conference call

10.3

Registering (additional) handsets:

base:

1. press and hold the button on the base

for 8 seconds

handset:

1. open the menu and select the option

[ ADVANCED SET ]

2. press the OK button and select the option

[ REGISTER ]

3. press the OK button and use the keypad

to enter the PIN code (factory code 0000

or your personal code)

4. press the OK button, the handset will now

start searching for the base

After several seconds, the handset will

have found the base and the internal

handset number will appear at the right

side in the display

10.4 De-registering handsets:

To de-register, select the option [ UNREGIS-

TER ] in the menu [ ADVANCED SET ].

11 TELEPHONE SETUP

11.1 HANDSET SETUP:

1. press the MENU button to open the menu

2. select the option [ PERSONAL SET ] and

press the OK button

3. select the desired option and press the

OK button

[ HANDSET NAME ]

You can assign a personal name to the hand-

set. When the handset is in standby mode,

this name will be shown in the display of the

handset.

[ MELODY ]

Use this option to set the ringtone and ring

volume and whether a sound must be emit-

ted when pressing one of the buttons

[ LANGUAGE ]

The various instructions in the display can

be shown in different languages. This option

allows you to set the desired language.

In case you’ve set an unknown language and

don’t know how to restore the English lan-

guage, please see below:

1. Press the key ‘phone-off’ 3 times.

2. Press the key MENU once.

3. Press key once.

4. Press the key OK once.

5. Press key twice.

6. Press the key OK once.

7. use the / buttons to select the

English language and press the OK

button to conrm this language

8. press the End button once.

11.2 BASE SETUP:

1. press the MENU button to open the menu

2. select the option [ ADVANCED SET ] and

press the OK button

3. select the desired option and press the

OK button

[ CHANGE PIN ]

A PIN code is required for registering or

de-registering additional handsets and for

certain other functions. The default PIN code

set in the factory is 0000, but you can use

this menu option to change the code into a

personal code.

See item [ RESET ] if you’ve forgotten your

PIN code.

[ REGISTER ]

This function is described in detail in chapter

10.3.

[ UNREGISTER ]

This option allows you to unregister lost or

faulty handsets.

[ RESET ]

In case you’ve forgotten your personal set-

tings or the PIN code, you can use this option

to restore the default factory settings.

Keep in mind that in addition to resetting your

settings, the PIN code will be 0000 again and

the Caller-ID memory and last dialed number

memory will be empty again. The phonebook

memory will not be deleted.

[ RECALL TIME ]

You can set the interruption time of the R/

FLASH pulse on SHORT (100 ms), MEDIUM

(270 ms) or LONG (600 ms).

Refer to the user manual of your home or

ofce switchboard or consult your carrier

concerning the desired interruption time.

100 ms is the standardized interruption time,

and this time is set at the factory.

12 SPECIFICATIONS

Protocol: DECT / GAP

4 handsets

RF frequency: 1880-1900 Mhz

RF power: < 24 dBm

Caller-ID: DTMF & FSK

auto selection

20 memories

Dialing: TONE

FLASH: 100, 270 & 600mS

Phonebook memory: 50 memories

Power supply charger: 2x 1.2V 300mAh

NiMH battery

format AAA

Power supply base station:

Power adapter

6VDC, 500mA,

S003GV0600050

Power supply charger pod:

Power adapter

6VDC, 150mA

S003GV0600015

Range: 50 m indoors

300 m outdoors

Operational life (with full batteries):

standby:> 100 hours

use:> 10 hours

Connection factor: ETSI 50

Operational temperature: 0°C to 40°C

Storage temperature: -20°C to 60°C

DECLARATION OF CONFORMITY

This device complies with the essential

requirements and provisions as described in

the European Directive 2014/53/EU.

The declaration of conformity is available at:

http://DOC.hesdo.com/FX-5500-DOC.pdf

6.5 Deleting:

1. press the MENU button

2. press the OK button and select DELETE

(to only delete the selected number) or

DELETE ALL

3. press the OK button and search for the

desired contact

4. press 2x the OK button to delete the se-

lected or all contacts

7 CALLER IDENTIFICATION

7.1 Indication new calls ( )

indicates you’ve received one or more new

calls you haven’t checked yet

7.2 View memory:

the last received call appears in the

display

scroll through the memory

7.3 Callback:

the last received call appears on the

display

search for the desired call and

press the phone-on key; the

number will be dialed

9.3 Operation:

• At the preset time, the alarm signal will

sound for 60 seconds or until you press a

random button to stop the alarm before-

hand.

• The alarm signal has a xed volume.

• When you’re currently on a call when the

alarm sounds, the receiver will emit three

short notication tones. After disconnect-

ing the call, the alarm signal will continue.

10 MULTIPLE HANDSETS

10.1 Intercom:

1. Press the key INT

as soon as the dialed device

answers, you can start the internal

conversation

2. press the End button to disconnect the

call

10.2 Forwarding / conference:

1. During the call with the outside line, press

the key INT

Call transfer:

after the call is answered, press the End

button to transfer the call

9 ALARM (WAKE-UP) FUNCTION

9.1 Alarm time setup:

1. open the menu and select CLOCK &

ALARM

2. press the OK button and select ALARM

3. press the OK button and select:

‘OFF’ to disable the alarm function

‘ON ONCE’ to have the alarm sound

only once

‘ON DAILY’ to have the alarm sound

every day

after selecting ‘ON ONCE’ or ‘ON DAI-

LY’: press the OK button and enter the

alarm time

4. press the OK button and the End button

to return the handset to standby mode

9.2 Alarm signal setup:

1. open the menu and select CLOCK &

ALARM

2. press the OK button and select ALARM

TONE

3. press the OK button to select the desired

tone

4. press the OK button and the End button

to return the handset to standby mode

v1.1

Fysic FX 5500 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fysic FX 5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info