458135
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
7.4 Copying / deleting:
open the Caller-ID memory
and search for the desired call
press the MENU button and select:
SAVE NUMBER to save the selected
number
DELETE to delete the call
DELETE ALL to delete all last incoming
calls
press the OK button and follow the on-screen
instructions
8 TIME & DATE
8.1 Time and date setup:
1. open the menu and select CLOCK &
ALARM
2. press the OK button and select DATE/TIME
3. press the OK button and use the keypad
to enter the following in order:
- the last 2 digits of the year
- the month (use 2 digits)
- the date (use 2 digits)
4. press the OK button and use the keypad
to enter the following in order:
- the hours (use 2 digits)
- the minutes (use 2 digits)
5. press the OK button and the End button
to return the handset to standby mode
conference:
as soon as the call is answered, briey
press and hold the INT button to start the
conference call
10.3
Registering (additional) handsets:
base:
1. press and hold the button on the base
for 8 seconds
handset:
1. open the menu and select the option
[ ADVANCED SET ]
2. press the OK button and select the option
[ REGISTER ]
3. press the OK button and use the keypad
to enter the PIN code (factory code 0000
or your personal code)
4. press the OK button, the handset will now
start searching for the base
After several seconds, the handset will
have found the base and the internal
handset number will appear at the right
side in the display
10.4 De-registering handsets:
To de-register, select the option [ UNREGIS-
TER ] in the menu [ ADVANCED SET ].
11 TELEPHONE SETUP
11.1 HANDSET SETUP:
1. press the MENU button to open the menu
2. select the option [ PERSONAL SET ] and
press the OK button
3. select the desired option and press the
OK button
[ HANDSET NAME ]
You can assign a personal name to the hand-
set. When the handset is in standby mode,
this name will be shown in the display of the
handset.
[ MELODY ]
Use this option to set the ringtone and ring
volume and whether a sound must be emit-
ted when pressing one of the buttons
[ LANGUAGE ]
The various instructions in the display can
be shown in different languages. This option
allows you to set the desired language.
In case you’ve set an unknown language and
don’t know how to restore the English lan-
guage, please see below:
1. Press the key ‘phone-off 3 times.
2. Press the key MENU once.
3. Press key once.
4. Press the key OK once.
5. Press key twice.
6. Press the key OK once.
7. use the / buttons to select the
English language and press the OK
button to conrm this language
8. press the End button once.
11.2 BASE SETUP:
1. press the MENU button to open the menu
2. select the option [ ADVANCED SET ] and
press the OK button
3. select the desired option and press the
OK button
[ CHANGE PIN ]
A PIN code is required for registering or
de-registering additional handsets and for
certain other functions. The default PIN code
set in the factory is 0000, but you can use
this menu option to change the code into a
personal code.
See item [ RESET ] if you’ve forgotten your
PIN code.
[ REGISTER ]
This function is described in detail in chapter
10.3.
[ UNREGISTER ]
This option allows you to unregister lost or
faulty handsets.
[ RESET ]
In case you’ve forgotten your personal set-
tings or the PIN code, you can use this option
to restore the default factory settings.
Keep in mind that in addition to resetting your
settings, the PIN code will be 0000 again and
the Caller-ID memory and last dialed number
memory will be empty again. The phonebook
memory will not be deleted.
[ RECALL TIME ]
You can set the interruption time of the R/
FLASH pulse on SHORT (100 ms), MEDIUM
(270 ms) or LONG (600 ms).
Refer to the user manual of your home or
ofce switchboard or consult your carrier
concerning the desired interruption time.
100 ms is the standardized interruption time,
and this time is set at the factory.
12 SPECIFICATIONS
Protocol: DECT / GAP
4 handsets
RF frequency: 1880-1900 Mhz
RF power: < 24 dBm
Caller-ID: DTMF & FSK
auto selection
20 memories
Dialing: TONE
FLASH: 100, 270 & 600mS
Phonebook memory: 50 memories
Power supply charger: 2x 1.2V 300mAh
NiMH battery
format AAA
Power supply base station:
Power adapter
6VDC, 500mA,
S003GV0600050
Power supply charger pod:
Power adapter
6VDC, 150mA
S003GV0600015
Range: 50 m indoors
300 m outdoors
Operational life (with full batteries):
standby:> 100 hours
use:> 10 hours
Connection factor: ETSI 50
Operational temperature: 0°C to 40°C
Storage temperature: -20°C to 60°C
DECLARATION OF CONFORMITY
This device complies with the essential
requirements and provisions as described in
the European Directive 2014/53/EU.
The declaration of conformity is available at:
http://DOC.hesdo.com/FX-5500-DOC.pdf
6.5 Deleting:
1. press the MENU button
2. press the OK button and select DELETE
(to only delete the selected number) or
DELETE ALL
3. press the OK button and search for the
desired contact
4. press 2x the OK button to delete the se-
lected or all contacts
7 CALLER IDENTIFICATION
7.1 Indication new calls ( )
indicates you’ve received one or more new
calls you haven’t checked yet
7.2 View memory:
the last received call appears in the
display
scroll through the memory
7.3 Callback:
the last received call appears on the
display
search for the desired call and
press the phone-on key; the
number will be dialed
9.3 Operation:
At the preset time, the alarm signal will
sound for 60 seconds or until you press a
random button to stop the alarm before-
hand.
The alarm signal has a xed volume.
When you’re currently on a call when the
alarm sounds, the receiver will emit three
short notication tones. After disconnect-
ing the call, the alarm signal will continue.
10 MULTIPLE HANDSETS
10.1 Intercom:
1. Press the key INT
as soon as the dialed device
answers, you can start the internal
conversation
2. press the End button to disconnect the
call
10.2 Forwarding / conference:
1. During the call with the outside line, press
the key INT
Call transfer:
after the call is answered, press the End
button to transfer the call
9 ALARM (WAKE-UP) FUNCTION
9.1 Alarm time setup:
1. open the menu and select CLOCK &
ALARM
2. press the OK button and select ALARM
3. press the OK button and select:
‘OFF’ to disable the alarm function
‘ON ONCE’ to have the alarm sound
only once
‘ON DAILY’ to have the alarm sound
every day
after selecting ‘ON ONCE’ or ‘ON DAI-
LY’: press the OK button and enter the
alarm time
4. press the OK button and the End button
to return the handset to standby mode
9.2 Alarm signal setup:
1. open the menu and select CLOCK &
ALARM
2. press the OK button and select ALARM
TONE
3. press the OK button to select the desired
tone
4. press the OK button and the End button
to return the handset to standby mode
v1.1
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fysic FX 5520 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fysic FX 5520

Fysic FX 5520 Bedienungsanleitung - Holländisch - 50 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info