199
delete some of them (see paragraph 8.9 & 8.10)
• The answering machine cannot be operated remotely:
-
You’re entering an incorrect remote code. Check
the remote code or program a new code (see
paragraph 8.13)
-
You’re trying to listen to the answering machine
using a pulse (rotary dial) phone. For operating the
answering functions remotely, you can only use a
DTMF phone (you’ll hear key tones when pressing
numeric buttons).
14.6 OTHER:
• The wired telephone emits a beep tone every 60
seconds:
- This is a notification to tell you that new messages
are registered in the answering machine. After
listening to these messages, the beep tone will
stop. You can also disable this function according to
the instructions in paragraph 8.7.
- The display stays blank:
- The batteries are empty, please recharge them.
• The handset is not connected with the telephone:
- You’re out of range from the telephone; move
closer.
- The handset is switched off. Check and switch on.
- the handset is not (no longer) registered on
the telephone; please register/re-register (see
paragraph 12.2).
In case the failure has not been solved with
aforementioned solutions:
•
Remove the batteries from the handset, and
unplug the power supply adapter and the phone
connector from their sockets; connect everything
again after several minutes.
