Bedienungsanleitung G3 Ferrari Bella (Seite 23 von 26) (Englisch, Französisch, Italienisch)

510153

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

3.2 Weak coffee

- Place a cup under the coffee spout and press the weak coffee button .

The operationg pilot light

will come on and BELLA will automatically grind and

compress the coffee, and then make and deliver a weak espresso coffee.

☞

You can stop the coffee delivery by pressing the multifunction button

3.3 Two coffees

- Place two cups under the coffee spout and press the strong coffee button or the weak

coffee button (depending on whether you want two strong coffees or two weak ones)

and immediately after press the two-coffee button

BELLA will automatically grind and compress the coffee, and then make and deliver two

espresso coffees.

☞

Press the two-coffee button

before

BELLA

begins grinding, otherwise

BELLA

will

make and deliver only one coffee.

☞

You can stop the coffee delivery by pressing the multifunction button

4. COFFEE BREWING - Ground coffee

WARNING:

- DO NOT USE INSTANT WATER-SOLUBLE COFFEE. ALWAYS USE GROUND COFFEE.

- ONLY PUT IN THE GROUND COFFEE CHUTE (N) THE NEEDED QUANTITY OF GROUND

COFFEE.

- DO NOT KEEP GROUND COFFEE IN THE GROUND COFFEE CHUTE (N)

- THE GROUND COFFEE CHUTE (N) IS NOT A CONTAINER.

- KEEPING GROUND COFFEE IN THE GROUND COFFEE CHUTE (B) CAN DAMAGE THE

COFFEE MACHINE.

Ground coffee tends to lose its flavour if it comes into contact with the air.

4.1 Strong coffee

- By using the specially provided spoon (M), put a spoon of your favourite ground coffee blend

in the ground coffee chute (N).

- Place a cup under the coffee spout and press the strong coffee button

and immediately

after the ground coffee button

gasket

- To wash the brewing group thoroughly, turn the screw located above the coffee spout

anticlockwise with a coin so that the brewing chamber moves and you can wash the parts

which were hidden.

WARNING: The movement of the brewing chamber is restricted by locks. DO NOT FORCE them.

☞

We advise you not to wash the brewing group in the dishwasher (although this would be

possible) because the coffee grounds would stick on the dishes.

- Clean BELLA inside with a soft cloth.

- Remove possible coffee grounds with a soft brush.

- Reinsert the brewing group. With a coin turn the screw located above the coffee spout with

short anticlockwise movements while gently pushing the

brewing group (FIG. E). In this way you will be able to

push a little the brewing group. Then push it completely

into the unit. (As soon as BELLA is switched on,

it will automatically position the brewing group correctly).

- Tighten the brewing group set screw.

- Close the brewing group housing door.

- Reinsert the coffee grounds box and the drip tray. FIG. E

☞

Lack of cleaning could cause an early wear of the brewing group gasket.

9.2How to replace the brewing group gasket

When the brewing group gasket wears out, it must be replaced with a new original gasket (our

ref. GU043).

The unit must be switched off and unplugged.

- Remove the brewing group by following

the instructions in point 9.1

- Replace the old gasket with a new one (our ref. GU043).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

G3 Ferrari Bella Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info