Bedienungsanleitung Gaggia Babila RI9700 SUP046DG (Seite 54 von 60) (Englisch, Italienisch)

718548

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Instructions

Istruzioni

Machine actions Causes Solutions

The machine does not turn on. The machine is not connected to the electric net-

work.

Connect the machine to the electric network.

The power button is set to "0". Check that the power button is set to "I".

The drip tray gets  lled although no

water is drained.

Water is sometimes drained automatically by the

machine into the drip tray to manage circuit rinsing

and ensure optimum machine performance.

This is a normal behaviour of the machine.

Co ee is not hot enough. The cups/mugs are cold. Preheat the cups/mugs with hot water or use the hot wa-

ter dispensing spout.

The beverage temperature in the programming

menu is set on Low.

Make sure that the temperature in the programming

menu is set on Normal or High.

You added cold milk to the co ee. Cold milk lowers the temperature of the  nal product. Pre-

heat milk before adding it to the beverage.

No hot water is dispensed. The steam/hot water dispensing spout is clogged

or dirty.

Clean the steam/hot water dispensing spout (see the

"Cleaning and Maintenance" chapter).

Inspect the spout to check that the dispensing spout is

not clogged. Make a hole in the limescale using a pin or

a needle.

The machine does not  ll the cup/mug. The machine has not been programmed. Access the beverage programming menu and adjust the

co ee length setting according to your personal taste for

each type of beverage.

Co ee does not have enough crema

(see note).

The blend is unsuitable, co ee is not freshly roasted

or the grind is too coarse.

Change co ee blend or adjust grinding as explained in the

“Adjusting the Ceramic Co ee Grinder” chapter.

The co ee beans or the pre-ground co ee are too

old.

Make sure that you use fresh co ee beans or pre-ground

co ee.

Milk does not froth. The carafe is dirty or not inserted correctly. Ensure that the carafe is clean and has been correctly in-

serted.

The machine takes a long time to warm

up or the amount of water dispensed

from the wand is too little.

The machine circuit is clogged by limescale. Descale the machine.

The brew group cannot be removed. The brew group is out of place. Turn on the machine. Close the service door. The brew

group automatically returns to the initial position.

The co ee grounds drawer is inserted. Remove the co ee grounds drawer before removing the

brew group.

The brew group cannot be inserted. The brew group is not in the o position. Make sure that the brew group is in the o position. The

arrows must face each other. To this purpose, see the

“Monthly” section of the “Brew Group Cleaning” chapter.

The gear is not in the initial position. Insert the drip tray and the co ee grounds drawer and

close the service door. Turn on the machine. The gear au-

tomatically returns to the initial position. You can now

insert the brew group.

TROUBLESHOOTING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggia Babila RI9700 SUP046DG Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggia Babila RI9700 SUP046DG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info