Bedienungsanleitung Garmin Dash Cam MINI (Seite 6 von 12) (Englisch)

698574

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Plug the Garmin Dash Cam Mini power cable into the

included power adapter.

Plug the power adapter into a power outlet in your vehicle.

If necessary, turn on the vehicle ignition switch to provide

power to the power outlet in your vehicle.

The device turns on.

Turning Off the Device Manually

NOTE: When the device is connected to an ignition-switched

power outlet, it turns off automatically when you turn off the

vehicle.

Disconnect the device from power.

The device turns off.

Formatting the Memory Card

The device requires a memory card formatted using the FAT32

file system. You can use the device to format your card using

this file system. You should format your memory card at least

one time every 6 months to help extend the useful life of the

memory card. You must also format a brand new memory card if

it is not formatted using the FAT32 file system.

NOTE: Formatting the memory card deletes all videos, photos,

and data on the card.

Connect the device to power.

Hold for eight seconds.

The LED at the base of the camera turns green.

When formatting is complete, the LED at the base of the camera

turns red and the device begins recording.

Pairing with Your Smartphone

You can pair your Garmin Dash Cam Mini camera with your

smartphone and the Garmin Drive

™

app. The Garmin Drive app

allows you to set up a multiple-camera network, change camera

settings, and view, edit, and save photos and videos.

From the app store on your smartphone, install the Garmin

Drive app.

Turn on your Garmin Dash Cam Mini camera, and place the

device and your smartphone within 3 m (10 ft.) of each other.

On your phone, open the Garmin Drive app.

Select an option:

• If this is the first Garmin

device you are pairing with your

smartphone, accept the Garmin Drive app license

agreements.

• If you are pairing an additional Garmin device or camera

with your smartphone, select Add a Device.

Follow the on-screen instructions to complete the pairing and

setup process.

The main app dashboard appears. After the devices are paired,

they connect automatically when they are turned on and within

range.

Dash Cam Recording

NOTICE

Some jurisdictions regulate or prohibit use of this device. It is

your responsibility to know and comply with applicable laws and

rights to privacy in jurisdictions where you plan to use this

device.

The dash cam records video to the camera memory card

(Installing a Memory Card, page 1). By default, the device

immediately starts recording video when it turns on, and it

continues recording until it is turned off. If the memory card is

full, the device automatically deletes the oldest unsaved video to

create space for new video.

When the option to promptly delete unsaved video is enabled,

the device continually deletes unsaved video more than three

minutes old and deletes all unsaved video each time it is

powered off. This feature is available only for specific regions

and is enabled by default for some of those regions. When the

camera is set to a supported region, you can enable or disable

this feature in the camera settings (Camera Settings in the

Garmin Drive App, page 3).

You can save a video recording to prevent it from being

overwritten or deleted (Viewing Videos and Photos on Your

Smartphone, page 3).

Turning Audio Recording On or Off

NOTICE

Some jurisdictions may prohibit recording audio in the vehicle or

may require that all passengers have knowledge of the

recording and provide consent before you record audio in the

vehicle. It is your responsibility to know and follow all laws and

restrictions for your jurisdiction.

The device can record audio using the integrated microphone

while recording video. You can turn audio recording on or off at

any time.

Press .

The microphone LED turns red while audio is recording.

Event Detection

By default, the device uses a sensor to detect possible incidents

and saves video footage automatically before, during, and after

the detected event. The video footage is stamped with the time

and date of the event.

Saving Videos and Photos

By default, the device uses a sensor to detect a possible

incident and saves video footage automatically before, during,

and after the detected event. You can also save video files and

photos manually at any time.

Press .

The device takes a photo and saves the video footage

before, during, and after you select .

TIP: You can press multiple times to save additional

photos and extend the length of the saved video footage.

The memory card has limited storage. After you save a video

recording, you should export the recording to your smartphone

(Trimming and Exporting a Video, page 3) or transfer the

recording to your computer or other external storage location for

permanent storage (Videos and Photos on Your Computer,

page 3).

2 Pairing with Your Smartphone

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Dash Cam MINI Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Dash Cam MINI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info